87 4Runner power window conversion
Mar 11, 2008 | 07:43 PM
#1
Thread Starter
Registered User
Joined: Jan 2005
Posts: 398
Likes: 1
From: High Point, NC/School at NC State
87 4Runner power window conversion
Hey guys, I got a question for ya.
I'm in the process of converting my 87 4Runner over to SR5, and found these PRISTINE door panels on ebay from an 89 runner. They are the carpet, electric windows ones, with the molds where they close tightly to the dash. very nice.
my question is this: my 87 is the base model with manual windows and also has the wing windows.
is there any way this would work, converting it to the new door panels with power windows. or should i just settle for some carpet panels from an older runner? thanks!
I'm in the process of converting my 87 4Runner over to SR5, and found these PRISTINE door panels on ebay from an 89 runner. They are the carpet, electric windows ones, with the molds where they close tightly to the dash. very nice.
my question is this: my 87 is the base model with manual windows and also has the wing windows.
is there any way this would work, converting it to the new door panels with power windows. or should i just settle for some carpet panels from an older runner? thanks!
Mar 13, 2008 | 03:18 PM
#3
Registered User
Joined: Jan 2007
Posts: 2,801
Likes: 2
From: milwaukee, WI baby muddin in the streets!!
if there the same body type then they should just go on, however its going to be a pain in the rump to get the wiring right relays power wire and what have you but i do think that toyota helped us out with this and theres a harness in your kick panels but not sure rip it apart and let us all know!!!!
Jul 5, 2008 | 11:18 AM
#4
Registered User
Joined: May 2008
Posts: 285
Likes: 0
From: Ottawa, On.
Hey guys, I got a question for ya.
I'm in the process of converting my 87 4Runner over to SR5, and found these PRISTINE door panels on ebay from an 89 runner. They are the carpet, electric windows ones, with the molds where they close tightly to the dash. very nice.
my question is this: my 87 is the base model with manual windows and also has the wing windows.
is there any way this would work, converting it to the new door panels with power windows. or should i just settle for some carpet panels from an older runner? thanks!
I'm in the process of converting my 87 4Runner over to SR5, and found these PRISTINE door panels on ebay from an 89 runner. They are the carpet, electric windows ones, with the molds where they close tightly to the dash. very nice.
my question is this: my 87 is the base model with manual windows and also has the wing windows.
is there any way this would work, converting it to the new door panels with power windows. or should i just settle for some carpet panels from an older runner? thanks!
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
MMA_Alex
86-95 Trucks & 4Runners (Build-Up Section)
25
Apr 18, 2017 05:07 AM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
Jul 6, 2015 04:07 AM
