Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

80 amp fuse help

Old May 13, 2009 | 12:26 PM
  #1  
Jory121's Avatar
Thread Starter
Registered User
15 Year Member
 
Joined: Sep 2008
Posts: 113
Likes: 0
From: Bellingham, Washington
80 amp fuse help

does anyone know how to get that freakin 80amp out thats in the fuse box under the hood????
Reply
Old May 13, 2009 | 12:49 PM
  #2  
Elton's Avatar
Contributing Member
 
Joined: Jul 2005
Posts: 12,261
Likes: 7
From: Siletz,Oregon
its more then likely bolted in from under neath

Last edited by Elton; May 13, 2009 at 01:21 PM.
Reply
Old May 13, 2009 | 01:14 PM
  #3  
bugs1961's Avatar
Registered User
 
Joined: Jul 2006
Posts: 479
Likes: 5
From: Anchorage
Unbolt the fuse block from the fender so you can access the bottom. Take the bottom cover off and you can see the underside of the 80 amp fuse. The fuse is in a small holder that has a release on top similar to a connector for other electrical components. Push the release and the fuse holder will drop down the bottom of the fuse box and then the bolts that pass through the spades will be accessible. You may be able to get to the bolts without releasing the fuse holder but only from below. Take care,
Bugs
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scotttekoch
General Electrical & Lighting Related Topics
5
Sep 28, 2015 10:30 PM
JPV
Pre 84 Trucks
2
Sep 28, 2015 03:15 PM
Rcbc92
95.5-2004 Tacomas & 96-2002 4Runners
5
Sep 26, 2015 03:00 PM
toyotasaurus
Vehicles - Trailers (Complete)
0
Sep 24, 2015 03:30 PM
Tcsdef
General Electrical & Lighting Related Topics
1
Sep 7, 2015 11:17 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 05:04 AM.