3VZE Woes Part III
03-27-2007, 05:53 AM
#1
Registered User
Thread Starter
Join Date: Jan 2007
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
3VZE Woes Part III
Please note my two previous posts.
https://www.yotatech.com/forums/show...ight=3vze+woes
https://www.yotatech.com/forums/show...ight=3vze+woes
Prognosis has been narrowed down to re-doing the heads and putting in a new head gasket.... burnt valve on cylinder #6.
? What is a good estimate on what to expect to pay to have the heads done?
? Is this worth it? The 4Runner is in great shape, but what about the lower ends of the 3VZE?
https://www.yotatech.com/forums/show...ight=3vze+woes
https://www.yotatech.com/forums/show...ight=3vze+woes
Prognosis has been narrowed down to re-doing the heads and putting in a new head gasket.... burnt valve on cylinder #6.
? What is a good estimate on what to expect to pay to have the heads done?
? Is this worth it? The 4Runner is in great shape, but what about the lower ends of the 3VZE?
03-27-2007, 06:25 AM
#2
Contributing Member
Join Date: Jun 2006
Location: Bountiful, UT
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
I got my heads rebuilt for about $300 - $350. My runner only had 170k miles on it so I trust that the lower end will last another 100k. If I had as many miles as you do I think I'd get the lower end rebuilt while I got the heads off. I really have no idea how long the lower end on these 3.0s last.
Thread
Thread Starter
Forum
Replies
Last Post
88yodabasket
86-95 Trucks & 4Runners
15
07-13-2015 01:32 PM
FS[NorAtl]: some RC stuff crawler and racer
akaphilly
Misc Stuff (Non Auto Related)
0
07-09-2015 02:34 PM
