3vze head gasket debate. Engnbldr vs LCE
#1
Registered User
Thread Starter
3vze head gasket debate. Engnbldr vs LCE
Over Christmas break Im going to tear apart my motor and take care of a few things. Mainly a pesky valve tick and a serious oil leak. Im going to have the heads checked and valves adjusted etc etc. So im looking at gaset sets. Engnbldr sells a set for 100 dollars plus 40 bucks for a new belt and another 40 for new bolts. I have heard nothing but good things about Engnbldr. I like the fact that he is a Toyota guru and knows his engines inside and out,
I have a friend who is saying "its LCE or bust" the head studs are 240 bucks and another 100 for the MLS gaskets. Anybody have experience with these??
As always, cost is a factor in my decision, but I don't want to have to tear it all apart in a year from now.
Any input is appreciated
BC
I have a friend who is saying "its LCE or bust" the head studs are 240 bucks and another 100 for the MLS gaskets. Anybody have experience with these??
As always, cost is a factor in my decision, but I don't want to have to tear it all apart in a year from now.
Any input is appreciated
BC
#2
Registered User
iTrader: (1)
I cant speak from experience, but I ordered the full gasket set from engnbldr, hes got a ton of support online here and was very plesant to speak to and deal with, but i'm getting the head bolts from NAPA for cheaper (but i have a discounted account there) and the timing belt kit I'm checking out good prices online.
#3
Registered User
Depends on whether spending more with LCE makes you feel cooler or not.
Go with Ted@engnbldr. LCE is overpriced. Engnbldr has eons of wisdom on a level that know one at LCE can begin to touch. I heard he was born with a sparkplug wire for an ambilical cord....drank motor oil....and idled at 750 rpms. He can also....time a 22r BY EYE. Tighten a crank bolt by hand. I could go on and on.
Toyota head gaskets...
Go with Ted@engnbldr. LCE is overpriced. Engnbldr has eons of wisdom on a level that know one at LCE can begin to touch. I heard he was born with a sparkplug wire for an ambilical cord....drank motor oil....and idled at 750 rpms. He can also....time a 22r BY EYE. Tighten a crank bolt by hand. I could go on and on.
Toyota head gaskets...
#4
Registered User
Thread Starter
im really leaning towards using engnblr's set. Your experience sounds like a typical experience that I have heard. How is the quality of the gaskets??
#5
Registered User
Regular gaskets were fine. I used toyota head gaskets. I wouldnt use anything else.
All parts I have got from them have been topnotch. bolt on. no isssues. perfect record with me. Plus him and son are so nice. These guys have dreams about toyota motors. If Ted tore his shirt off...there wouldnt be a big "S" there. It would be a 22re badge. He ships right away. Packaging nice.
Never....heard a bad thing yet. I think he patrols for possible issues like a uboat in the atlantic. Anything remotely customer service pops up...he is there...torpedos it with happiness and dissappears.
All parts I have got from them have been topnotch. bolt on. no isssues. perfect record with me. Plus him and son are so nice. These guys have dreams about toyota motors. If Ted tore his shirt off...there wouldnt be a big "S" there. It would be a 22re badge. He ships right away. Packaging nice.
Never....heard a bad thing yet. I think he patrols for possible issues like a uboat in the atlantic. Anything remotely customer service pops up...he is there...torpedos it with happiness and dissappears.
Trending Topics
#10
Registered User
Thread Starter
I get 2 weeks off for Christmas. I will be spending a lot of time in the garage.... new gasket set, plus I got some headers and flame thrower injectors to install as well. its going to be a good Christmas!
#11
Registered User
iTrader: (1)
I got my set a week or so ago and now started the re assembly. It was new for me to see that these gaskets are "upside down" from previous posts on gaskets. But i threw it on regardless, im guessing the style changed again so dont worry too much when you get your gaskets and see it opposite of what okd posts show. Graphite side now faces up, and slipper plate faces block.
Thread
Thread Starter
Forum
Replies
Last Post
kgcwb44
86-95 Trucks & 4Runners (Build-Up Section)
4
01-29-2023 10:02 AM
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM