3vze cold start injector advice

Reply Subscribe

Thread Tools

Search this Thread

Nov 4, 2019 | 07:42 PM

#81

Austin Smith

Registered User

Joined: Nov 2019

Posts: 1

Likes: 0

What cool did you replace

Please help

Quote:

Originally Posted by ddv1126

Replaced the coil since then its been starting perfect. I guess the coil was working only sometimes. Thanks for the help Hans.

Nov 5, 2019 | 05:04 AM

#82

ddv1126

Thread Starter

Registered User

Joined: Jan 2013

Posts: 154

Likes: 0

From: San Antonio

Quote:

Originally Posted by Austin Smith

Please help

I replaced the ignition coil

Mar 24, 2021 | 07:51 AM

#83

Jocas76

Registered User

Joined: Mar 2021

Posts: 1

Likes: 0

Starts cold but not hot

Hello there. It's been a while and years have passed and now I'm dealing with a start issue.
Mine is a 91 M/T in tropical weather. The engine wouldn't start and the check engine indicator light is dimmed. If the green line that goes into the Cold Start Injector is jumped to ground, the check engine indicator light will recover brightness and the engine will start. The problem is once the engine warms up it won't fire back up...regardless.
My main question or concern is as to the reasons WHY the green line on the CSI has to be jumped and WHY the computer is experiencing a voltage issue as for an additional ground connection/jumper to be required in that particular cable/line in order for the engine to fire up. The issue reported by the guy in Puerto Rico mentions a similar problem but he never mentioned anything about a Check Engine light being involved.

Any ideas will be extremely appreciated. I'm just an enthusiast trying to save a dollar or two. TNXS