Andrew Eckart

i am rebuilding my 1989 pickup and just need some good tips to help me thru all the way from pulling the motor to putting it back in any tip will help thanks... also if anyone knows where i can get a good rebuild manual please share

snobdds

Get a full OEM gasket kit from the dealer or an online OEM parts source like Toyotapartszone.com.

Read Yotatech till your eye's blead.

That's all you need, all your questions will be answered through the search button. It's been done many, many, many times before oh here. Search for Iamsuperbleeder and Olharleyman, they have good threads on their rebuilds.

Oh by the way, there are no single trick(s) that's going to make your rebuild magical by some metric. A good rebuild is accomplished by putting together a string of proper techniques and quality parts. Remember, it's too expensive to be cheap.

Inferno451

Be sure to GAP YOUR RINGS!!!! Doesnt take long, but i assumed my rings were pre gapped and now one of them broke and put a big gouge in the cylinder wall. NOT fun.

waskillywabbit

iTrader: (-1)

Read the engine rebuild threads like superbleeders.

:wabbit2:

Duffdog

deck the head-- unless you are getting a new head. They are almost always warped after long mileage.

abecedarian

Proper assembly lube on the cam and such....

{deja vu- I thought I said that already}