I have read quite a bit on here, whats the deal with me? ive got new stock coils in the rear, and my torsion bars are cranked quite a bit, but i clear 35x12.50x15s, no fab, no cutting, no rub....am i lucky or am i missing something?

 

Its possible, but I bet it rides hard with the torsion cranked up.

 

post a pic of your front end. that seems like a LOT of clearance for no lift and 35s

 

you best believe she rides bout hard as can be, even with new shocks, i keep tearing up cv axles as well

 

Your T-bar crank has more height than my 1.5 BJ spacers. I bet that's real uncomfortable. With that angle I'm not at all surprised that it eats CV's.

 

You obviously have some type of lift.

I would say the front has a drop bracket & torsion bars cranked.

Not sure about the rear.

 

Looks like 3" body lift height

Heres my old '90 with sagged coils, cranked bars and a 3" body on 35x12.5 on 15x10s

 

I would say that you are missing something. That definitely looks like some sort of lift.

 

Wasn't that truck for sale on craigslist? Are you the new owner?

 

im thinking body lift. and whats that angle iron shaped thing below the front valence?

 

Right now im clearing 315/75/16 so pretty much 35/12.5/16. I also have no lift on my 90 Toyota pickup. The only problem im having is a little rubbing on turns, but im soon to fix that with 1.5in bj spacers

 

That gas door is pretty high for t-bar crank and 35's. My truck's is about belt buckle level with 235's and all stock, that looks lifted...unless the guy filling it is really, really short!

 

im not sure what i am missing, ill attach another picture

 

My 88's got about as much wheel well gap with 31" as yours with 35"... and I have a 4" susp lift. Granted, yours is newer but c'mon....
Show full-on side shot, and one looking up at the front suspension.