1987 4runner front power windows
#21
Registered User
Thread Starter
Join Date: May 2008
Location: Eugene Oregon
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
ok I have power everywhere I'm supposed to and I got a door control relay from nix99 but it didnt help my issue I'm just not getting power from the door control relay back to the windows... but the door locks work great. and I got new switches
#24
Registered User
Thread Starter
Join Date: May 2008
Location: Eugene Oregon
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
yeah I pretty much replaced everything I just cant get power out of the relay to the switches. I was told that I could bypass the relay which I am going to try tomorrow. I have checked the ground wire its good, but the blue wire w/ the red stripe does not get power out of the relay??? I have two relays and have tried them both... Anyone got any ideas on how to bypass the relay or know whats wrong with it???? the motors are good and the switches should be also
#26
Registered User
Thread Starter
Join Date: May 2008
Location: Eugene Oregon
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
nah I wanna keep power everything. I cant roll down my windows... but I have been able to teach myself how to use my multimeter to check for continuity and voltage. And how to take my 4runner apart without breaking parts I will be keeping it around for a while. And not to mention all the new tools I've got ... Yaay new tools
Last edited by slowncurious-87; 01-19-2009 at 08:59 AM.
#27
Registered User
Thread Starter
Join Date: May 2008
Location: Eugene Oregon
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
ok I got them working... well kinda. I cut the power wire going into the relay and ran another wire across to the same wire that I cut into the harness now drivers side window goes up and down passenger side though just goes down oh well 3 out of 4 aint bad!
Thread
Thread Starter
Forum
Replies
Last Post
WTB[SouthEast]: 2001 Tacoma Passenger Side Power Window Harness
scottt80
Items Wanted
0
07-01-2015 12:13 PM