HID on first gen 4runner. Will D2S bulbs fit?
Oct 23, 2007 | 01:34 PM
#1
Thread Starter
Registered User
Joined: Mar 2007
Posts: 762
Likes: 0
From: Seattle
HID on first gen 4runner. Will D2S bulbs fit?
So I am doing the next best thing to retrofitting projectors into my headlights.
I'm putting in the "caspers shields/D2S adapters" and using D2S bulbs in the after market clear lense (multiface reflector) housings with the fake "projector".
My question is, will the D2s bulb fit on the passanger side? Or, will it stick out too far and be in the way of the windshield washer fluid container?
btw, this could all be accomplised for under $150 vs. the $300 if using real projectors out of an oem hid equiped car.
ps, any opinions on the casper's shields?
I'm putting in the "caspers shields/D2S adapters" and using D2S bulbs in the after market clear lense (multiface reflector) housings with the fake "projector".
My question is, will the D2s bulb fit on the passanger side? Or, will it stick out too far and be in the way of the windshield washer fluid container?
btw, this could all be accomplised for under $150 vs. the $300 if using real projectors out of an oem hid equiped car.
ps, any opinions on the casper's shields?
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacNorWest]: Toyota Inclinometer/Altimeter
AkitaDog
Misc Stuff (Vehicle Related)
12
Sep 1, 2015 08:05 AM
JAMGarcia
General Electrical & Lighting Related Topics
7
Jul 31, 2015 11:46 PM
vanion2
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
2
Jul 29, 2015 06:17 PM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
Jul 6, 2015 04:07 AM
