Swapping a w56
08-23-2017, 04:51 PM
#1
Registered User
Thread Starter
Swapping a w56
my l52 crapped out me I can get a rebuilt w56 on cl will my transfer case bolt up to it. I already know about drives shaft will need to be changed out and I will need a different cross member.
08-23-2017, 05:53 PM
#4
Registered User
Should work, only problem I ran into and this was before I even knew I had a w56 in my truck (see my thread) is taking the engine out was a royal pain the arse, I can only imagine getting the w56 in there is going to suck, but itll go.
If you wanna see how the previous owner of my truck made their mount you can see my thread. Not how I was going to OR would do it but its a simple solution and I put a solid 5000 miles on it like that so i doubt its going anywhere.
If you wanna see how the previous owner of my truck made their mount you can see my thread. Not how I was going to OR would do it but its a simple solution and I put a solid 5000 miles on it like that so i doubt its going anywhere.
