starting my 83 2rz swap
10-06-2009, 05:31 PM
#61
Registered User
Thread Starter
Join Date: Mar 2008
Location: Damascus, Or
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
ok anybody know why I have no high idle when it's cold? I suspect I wired something wrong or there's a bad sensor or I just didn't wire something during the swap.
05-07-2013, 05:58 AM
#62
Registered User
I am doing this swap in my 83 pickup 2wd. Did you use the stock 2rz mounts or22r? Im pulling the entire harness out of a 96 and putting in in my 83 including gauge cluster and everything. Do you know if I will have to get a t100 oil pan even in a 2wd? I'm building a small drift toy out of it hopefully putting 200-250 to the ground I bought full motor and 5spd trans and entire wiring for $500 so figured it was worth a shot
As you can see there's a little stress hole in the frame and I welded the mounts in about 3/4" from the center of the hole
Thread
Thread Starter
Forum
Replies
Last Post
