Pre 84 Trucks 1st gen pickups

New Front Driveline?

Thread Tools
 
Search this Thread
 
Old Nov 29, 2010 | 09:01 AM
  #1  
red1983's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Apr 2008
Posts: 227
Likes: 0
From: Alaska
New Front Driveline?

Hey Folks!

I was curious if anyone knows of someone making a replacement front driveline for our trucks, I live in Colorado and the 4x4 is essential! I have a ton of vibration in 4x4 or when the hubs are locked in and the ujoint, to me, seems fine.

Thanks!
Reply
Old Nov 29, 2010 | 12:47 PM
  #2  
dropzone's Avatar
Fossilized
iTrader: (6)
 
Joined: Oct 2005
Posts: 19,771
Likes: 456
From: PNW
seems like this subject was covered recently
anyway:
Dave's Off road makes one. Any local reputable D/S shop should be able to make one for you and you have a couple of good sources in Colorado for used toyota parts

here are some source for used parts: Link is a sticky in this folder:
https://www.yotatech.com/forums/f114...rs-etc-221643/
Originally Posted by ocdropzone;51081918[COLOR="darkred"
Parts/Bumpers/Mounts[/COLOR]
4Crawler Off Road: http://4crawler.com/4x4/ForSale/ProductLine.shtml Custom body lifts, Driveshaft spacers, electrical solutions
Addicted Off Road: http://addictedoffroad.com/
TRD PARTS 4 U: http://trdparts4u.com/
4xinnovations: http://4xinnovations.com/
Marlin Crawler: http://marlincrawler.com/
trail-gear: http://www.trail-gear.com/
All Pro Off Road: http://www.allprooffroad.com/
Dave' Off Road Performance: http://www.davezoffroadperformance.com/ Tube doors, third members, driveshafts,etc

Toyota Truck Dismantlers: body parts/axles etc
The Toy Man (newberg, OR) http://www.thetoyotaman.com/
MazToy (troutdale, OR)http://maztoy.com/
A1 Light Truck parts (PDX) http://www.a-1truckparts.com/index.htm
Davez Off Road: http://www.davezoffroadperformance.com/
Yotayard (colorado) http://www.yotayard.com/home.htm
Jim's Got Parts (Denver, CO) http://jimsgotparts.com/
California Mini Trucks (Cali) http://www.calminitruck.com/
NIX99 (washington state) http://nix99.com/
Rancho Toyota Truck Dismantler (Cali) http://www.ranchotoyotatruckparts.com/
toy truckc (CA) http://www.toytruckscalifornia.com/
Toy Connection (CA) http://www.toyconnection4x4.com/home.html
All Toyota Truck and SUV (CA) http://www.alltoyotatrucksuvparts.com/
ToyoKings (FLA) http://www.toyokingsusedparts.com/
Yotatech Classifields :https://www.yotatech.com/forums/f91/
TTORA Classifieds: http://ttora.com/forum/forumdisplay.php?f=3
Pirate classifieds: http://pirate4x4.com/forum/forumdisplay.php?f=4
Parts Locators: http://www.autopartslocator.com/
http://www.seekautoparts.com/

DeNaples (Dunmore, PA) http://www.denaples.com/

New sheetmetal parts-Rust Repair Panels: http://www.alfaparts.net/toyotapu.htm


Thread on http://www.toyotadiesel.com/forums/showthread.php?t=343 with Parts sources/ links in Cananda & Australia



Sticker Kits
Jame Dean Creations: http://jamesdeancreations.com/ Toyota vehicle sticker reproductions
Originally Posted by MudHippy
I'm not sure where this thread is going. But I do have some contributions if you're looking for some.

Here's the links page from the wiki. I've been adding to it for quite awhile now. Lot's of part sources there.
https://www.yotatech.com/wiki/index.php/Links

Also here's another Toyota dismantler. Bought a speedo cable from him last week.


If you're looking for used parts the BEST site on the web is definitely Car-Part.com

Last edited by rworegon; Aug 14, 2014 at 05:48 PM.
Reply
Old Dec 3, 2010 | 08:53 AM
  #3  
Alex123456's Avatar
Registered User
 
Joined: Aug 2010
Posts: 27
Likes: 0
From: Omaha, NE
They are pretty easy to find in junkyards or in parted out trucks, I have like 10 of them.
Reply
Old Dec 4, 2010 | 05:19 PM
  #4  
ScottyC's Avatar
Registered User
iTrader: (1)
 
Joined: Aug 2006
Posts: 3,477
Likes: 0
From: Ft Collins, CO
Is it a stock CV shaft from an IFS rig? I have several I can look at and sell you. I would just need to know the application and flange to flange measurement. I am in Greeley
Reply
Old Dec 4, 2010 | 06:04 PM
  #5  
SpecialScottie's Avatar
Registered User
 
Joined: Jan 2008
Posts: 940
Likes: 0
From: Sun Valley, CA
Maybe yours simply needs to be balanced?
Reply
Old Dec 16, 2010 | 02:52 PM
  #6  
red1983's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Apr 2008
Posts: 227
Likes: 0
From: Alaska
Sorry to post so late! Lots of used ones available, I was looking for a brand NEW for a STOCK truck. I ended up ordering a custom one from Tom Woods driveshaft. So for future folks looking for one, just get a custom one from a driveshaft shop of your choice.

[QUOTE=ocdropzone;51604503]seems like this subject was covered recently QUOTE]

I promised I searched! I don't know why I didn't see anything, most everything was for SAS swaps and such.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
88sasturbotoy
Axles - Suspensions - Tires - Wheels
3
Jan 30, 2026 01:57 PM
justdifferentials
Just Differentials
1
Aug 15, 2015 05:25 PM
RobotMoose
Diesel Swaps
8
Aug 2, 2015 11:00 PM
coffey50
Offroad Tech
17
Jul 28, 2015 10:55 AM
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
Jul 24, 2015 01:44 PM




All times are GMT -8. The time now is 04:56 PM.