front springs questions
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: Vancouver, Wa
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
front springs questions
I am going to look at a set of '4" lift springs' today and wanted to find out how to tell if they are what he is saying they are. What measurements should I make? How is length measured? What is stock length for 1st gens?
He said that he ran them with everything stock (driveline, brake lines ect.) is this possible, I thought you had to extend the brakelines for 4". Also how do you tell if they are worn out?
Thanks for the help.
He said that he ran them with everything stock (driveline, brake lines ect.) is this possible, I thought you had to extend the brakelines for 4". Also how do you tell if they are worn out?
Thanks for the help.
Last edited by WSUWESTON; 03-29-2007 at 09:35 AM.
#2
I run 3.5 lift springs with stock lines. Look for cracks in the springs, and make shure the springs match. Make shure one is not more flat than the other. Generally speaking its hard to mess up leaf springs.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM