Changed out the Clutch Master Cylinder
07-02-2018, 12:21 PM
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Near Grand Junction, CO
Posts: 126
Likes: 0
Received 20 Likes
on
16 Posts
Changed out the Clutch Master Cylinder
The old (original?) clutch master cylinder on our '83 was leaking on the new carpet, so it had to go. Found an Aisin replacement on eBay for about $16.00 US. It was an exact copy of the one in the truck. Swapped in the new one this morning. The entire job took less than an hour, including bleeding the line to get rid of the old fluid and the air that got in. Actually a very simple DIY job that would likely have cost well over $100 if I had a shop do it. Very happy with how the clutch works now too. Happy camper! 
07-03-2018, 04:01 AM
#4
Registered User
Thread Starter
Join Date: Jan 2007
Location: Near Grand Junction, CO
Posts: 126
Likes: 0
Received 20 Likes
on
16 Posts
This truck is a rust-free "survivor" and the lines looked like new. Of course that's no guarantee, anything could happen on a 35-year old truck. 
Thread
Thread Starter
Forum
Replies
Last Post
YotaJunky
86-95 Trucks & 4Runners
3
10-01-2005 10:23 AM
toyota884runner
95.5-2004 Tacomas & 96-2002 4Runners
0
04-26-2004 04:50 AM
Plays_with_Toys
95.5-2004 Tacomas & 96-2002 4Runners
16
08-13-2003 02:26 PM
