I’m finally putting my project trunk together after a year. I have to hook the alternator up; I was wondering if you guys could help me out. I have two green plugs on the driver side of the engine bay, one plug has 4 wires, a big black wire coming from it (is it a ground) the other 3 are white with black stripe, green, and yellow which all go to the alternator plug. The other plug just has a big fat white wire coming from it. Could any one tell me how its set up on your truck. My truck is a 82 4x4 2.4L and it has the 5 blade regulator.


Thanks
Kris

 

if u can take a pic of the plugs and it will be easier to tell u where they go.

 

Yeah I guess it would. Ill try to load some up.
Thanks

 

her is a picture

 

Could any one tell me what color wires go to the alternator if they have a similar model truck.

Thanks

 

i dont have the answer but here are the fsm and u might be able to find the answer there...

http://www.ncttora.com/fsm/index.html

 

The black ,green and yellow wires goes to the plug on the back of the alt. The white wire goes to the post to the left of the plug . That is looking from the front of the motor towards the firewall. My truck also has a 5 wire regulator plug. I did not see the two plugs, so there might be a difference between the 2wd and the 4wd models. I think that some alts had a adaptor plug on them which might mean a differant type of alt.

 

Hey thanks alot guys, I really wanted to make sure thats where the white wire went. the wiring on my truck is kinda scarry haha. Im going to need alot of eletrical tape haha.