302 conversion!!!
#1
Registered User
Thread Starter
Join Date: Feb 2009
Location: Yakima, Wa
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
302 conversion!!!
Where can i get a bellhousing that will fit a 302 to my toy tranny? and will my knuckles hold up with something this heavy up there, i have 38.5s 1.5 inch wheel spacers and like a 3 inch offset wheel, so i like to eat up trunion bearings already.
#2
Registered User
Join Date: May 2007
Location: Dinuba Ca.
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Wow that sounds like fun. I talked to a guy once who use to build toyotas with the 5.0 and he said he never had any problems with anything but the rearend on one he built for his buddy once and that was only cause his buddy liked to wind it up and dump the clutch That was the only problem he had so he went to a ford nine inch and no more problems so good luck bud.
Last edited by mikepr55; 02-26-2009 at 12:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
06-11-2017 08:36 PM
nvwiggins
86-95 Trucks & 4Runners (Build-Up Section)
13
06-16-2016 03:05 PM
live4soccer7
84-85 Trucks & 4Runners
3
05-11-2016 06:52 PM
runnermedic
95.5-2004 Tacomas & 96-2002 4Runners
13
09-21-2015 05:20 PM