FS[FourCorners]: Fender flares 1st gen runner
Jul 12, 2014 | 06:11 PM
#1
Thread Starter
Registered User
Joined: Jul 2013
Posts: 91
Likes: 0
From: High Rockies, Colorado
Fender flares 1st gen runner
I have for sale a full set (4) of black plastic fender flares. I took them off of my 86 4runner. They are all in good shape, no cracks or chips minus 2-3 cracked mounting holes. They mount up and stay on perfectly. I don't know what brand they are or if they are OEM but they were on my runner when I bought it.
Pm me with offers. No hardware is included but I would suggest using some self tapping metal screws. Located in Breckenridge, CO will ship at buyers expense.
Thanks for looking!
And look here for a picture of them on my 4runner for reference.
https://www.yotatech.com/forums/f199...runner-277683/
Pm me with offers. No hardware is included but I would suggest using some self tapping metal screws. Located in Breckenridge, CO will ship at buyers expense.
Thanks for looking!
And look here for a picture of them on my 4runner for reference.
https://www.yotatech.com/forums/f199...runner-277683/
Jul 15, 2014 | 07:44 AM
#5
Registered User
Joined: Jan 2010
Posts: 3,795
Likes: 33
From: Bloodymore
How do they mount? I know you said there are mounting holes, do you drill into the fender or are the attached at the inner wheel well. Pics? And do u have any pics showing how far they stick out, I'll go thru your thread. I may be interested.
Found:
Found:
Last edited by RBX; Jul 15, 2014 at 07:45 AM.
Jul 16, 2014 | 10:27 AM
#6
Thread Starter
Registered User
Joined: Jul 2013
Posts: 91
Likes: 0
From: High Rockies, Colorado
They mount by screw on the inside of the wheel well. Some self tapping screws would be perfect, that's what was on there before. They stick out 2-2.5 inches. I don't have any pictures of them from a good enough angle to show the width
Trending Topics
Aug 13, 2014 | 10:05 AM
#12
Thread Starter
Registered User
Joined: Jul 2013
Posts: 91
Likes: 0
From: High Rockies, Colorado
They are still available. Currently collecting dust in my shed. Check my build thread for pics of them on the rear. Pm me offers, I most likely won't say no. Take into account shipping is on you.
Jan 5, 2015 | 05:56 AM
#16
Registered User
Joined: Dec 2013
Posts: 15
Likes: 0
From: Live on the Eastern Shore of VA
Can anyone tell me what brand fender flares these are? The look like Jungle fender flares but I talked to them and they dont make them for the gen 1 or gen 2. ONly gen 3 and latter
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
Jul 6, 2015 10:00 AM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
Jul 6, 2015 04:07 AM
