Notices
Misc Stuff (Vehicle Related) Interior, exterior, audio, anything that does not fit into the above categories

Arizona Members Market Place - WANTED or FOR SALE LOCALLY

Old Oct 23, 2011 | 08:41 PM
  #21  
snowshredder555's Avatar
Registered User
 
Joined: Nov 2007
Posts: 680
Likes: 0
From: Gilbert, Az.
Wanted...

Looking for a LockRight or an Aussie locker for the 8" rear...must be complete...
GILBERT, AZ....
$$ negotiable.
-Ted
Reply
Old Oct 26, 2011 | 01:17 PM
  #22  
MortonPhotographic's Avatar
Registered User
 
Joined: Mar 2010
Posts: 304
Likes: 1
From: Scottsdale, AZ
Just updating, I no longer need the cat requested here. THANKS!

Does anyone have working bolt-on cat they can part with? Stock size.

Last edited by MortonPhotographic; Nov 4, 2011 at 10:04 AM.
Reply
Old Oct 26, 2011 | 01:56 PM
  #23  
angrybob's Avatar
Thread Starter
Registered User
 
Joined: Mar 2010
Posts: 504
Likes: 0
From: Peoria, AZ
Originally Posted by MortonPhotographic
Does anyone have working bolt-on cat they can part with? Stock size.
Check Craigslist there was a full stock system recently for 60 I think...used of course.
Reply
Old Oct 26, 2011 | 05:00 PM
  #24  
MortonPhotographic's Avatar
Registered User
 
Joined: Mar 2010
Posts: 304
Likes: 1
From: Scottsdale, AZ
I saw that one, I think it is the entire exhaust and down to $45. I really want a bolt in unit to make it quick. I have a new weld in cat I want to save until I do an entire exhaust build.

I may just grab that one though... thanks!

Paul
Reply
Old Oct 26, 2011 | 07:04 PM
  #25  
Phessor's Avatar
Registered User
 
Joined: Oct 2007
Posts: 137
Likes: 0
From: Smallville, AZ
SOLD

Thank you, Phessor

Last edited by Phessor; Mar 26, 2012 at 07:07 AM.
Reply
Old Oct 26, 2011 | 07:05 PM
  #26  
Phessor's Avatar
Registered User
 
Joined: Oct 2007
Posts: 137
Likes: 0
From: Smallville, AZ
Found one
Thank you, Phessor

Last edited by Phessor; Mar 26, 2012 at 07:08 AM.
Reply
Old Nov 2, 2011 | 01:24 AM
  #27  
808nickh's Avatar
Registered User
 
Joined: Apr 2010
Posts: 241
Likes: 0
From: Hawaii - Arizona
Originally Posted by 808nickh
Parts off of 86 toyota 4runner sr5 all prices OBO located off of Frank Lloyd Wright and the 101

Super winch manuel locking hubs $30.00 pair

OEM 1st gen rear roll bar w/ leather padding $30.00 Sold*

Solid front axle cut out for e-locker 3rd memeber holes for studs marked but not drilled or tapped $30.00 housing only Sold*

Rear passenger side window for glass for 1st gen 4runner top (not sliding window) $20.00

Front passenger door glass (door has wing window) $20.00

Both driver and passenger side wing windows $15.00 ea.

Windshield wiper motor $20.00

Shoot me a PM if interested thanks, Nick
Trades Welcome!
Reply
Old Nov 8, 2011 | 09:51 AM
  #28  
MortonPhotographic's Avatar
Registered User
 
Joined: Mar 2010
Posts: 304
Likes: 1
From: Scottsdale, AZ
Sold my cargo van so I am driving the Toyota full time. Problem is the power window won't go up now!

Anyone have a driver's side power window switch for a 1988 4runner. I have the countoured door panels with the long, one piece switch.

THANKS!
Reply
Old Nov 28, 2011 | 10:40 PM
  #29  
MortonPhotographic's Avatar
Registered User
 
Joined: Mar 2010
Posts: 304
Likes: 1
From: Scottsdale, AZ
Anyone parting out a 1988 4runner? I am interested in a bunch of parts including, but not limited too:

driver and passenger door glass without too many scratches Got it!
rear tailgate glass withut too many scratches Got it!

driver's side and passenger side powe window switches Got it![/COLOR]
Clutch cancel switch
grey center dash vent housing
uncracked grey dash pad (I do realize how funny that is)
Center console or maybe just the front part around the shifters
brake lines

Sadly, there's probably more...

Last edited by MortonPhotographic; Jul 18, 2012 at 09:58 PM.
Reply
Old Nov 29, 2011 | 09:46 AM
  #30  
808nickh's Avatar
Registered User
 
Joined: Apr 2010
Posts: 241
Likes: 0
From: Hawaii - Arizona
Originally Posted by MortonPhotographic
Anyone parting out a 1988 4runner? I am interested in a bunch of parts including, but not limited too:

driver and passenger door glass without too many scratches
rear tailgate glass withut too many scratches
driver's side and passenger side powe window switches
Clutch cancel switch
grey center dash vent housing
uncracked grey dash pad (I do realize how funny that is)
Center console or maybe just the front part around the shifters
brake lines

Sadly, there's probably more...
Are your windows the wing window type or are they full windows? if there the wing window type i have a nice passenger window and both driver and passenger wing windows.
Reply
Old Dec 1, 2011 | 11:18 AM
  #31  
TRDevelopment's Avatar
Registered User
 
Joined: Sep 2010
Posts: 158
Likes: 0
From: Phoenix, AZ
Originally Posted by MortonPhotographic
Anyone parting out a 1988 4runner? I am interested in a bunch of parts including, but not limited too:

driver and passenger door glass without too many scratches
rear tailgate glass withut too many scratches
driver's side and passenger side powe window switches
Clutch cancel switch
grey center dash vent housing
uncracked grey dash pad (I do realize how funny that is)
Center console or maybe just the front part around the shifters
brake lines

Sadly, there's probably more...

I have the clutch cancel switch... pm me if your interested.
Reply
Old Dec 5, 2011 | 01:34 PM
  #32  
MR2staci's Avatar
Registered User
iTrader: (1)
 
Joined: Dec 2011
Posts: 5
Likes: 0
Im looking for:

A the driver side part of the rear bumper that loops around the side.

b a tube rear bumper

Im located over in buckeye
Reply
Old Dec 5, 2011 | 06:53 PM
  #33  
MortonPhotographic's Avatar
Registered User
 
Joined: Mar 2010
Posts: 304
Likes: 1
From: Scottsdale, AZ
MR2Staci,

Are you talking about the factory plastic sides of a 1st Gen 4Runner? If so I have both sides.
Reply
Old Dec 5, 2011 | 06:54 PM
  #34  
MortonPhotographic's Avatar
Registered User
 
Joined: Mar 2010
Posts: 304
Likes: 1
From: Scottsdale, AZ
808Nick,

I have the solid, 1 peice windows... thanks though!
Reply
Old Dec 6, 2011 | 07:36 AM
  #35  
MR2staci's Avatar
Registered User
iTrader: (1)
 
Joined: Dec 2011
Posts: 5
Likes: 0
i should of put the year, its a 93 so 2nd gen

The bumper is 3 parts, the back middle and the 2 sides. I need the (driver side) side.

Or a whole tube bumper works as I have a tube bumper on the front already
Reply
Old Dec 9, 2011 | 06:06 AM
  #36  
Replicant's Avatar
Registered User
 
Joined: Jun 2011
Posts: 129
Likes: 0
From: Queen Creek, AZ
I have a bunch of 2nd gen pickup/4runner stuff. All motor parts are from 3.0.
All prices are obo.
Rear sliding window from pickup, tinted- $100
Tow hitch for pickup-$75
Almost all engine parts from a 3.0- manifolds, heads, throttle body, air filter tube and housing, A/C compressors, alternators, etc....just ask.
Automatic (ECT) tranny- $100
Transfer case- 75$ (or 150 for both tranny and trans case)
Drop in K&N filter- $25
I probably have more I cant think of, ask and I may have it. Im in Queen Creek, but travel to Tempe/Phoenix everyday.
EDIT: The tow hitch, window, and most engine parts are sold. I still have the Auto tranny, transfer case, 3.0 motor, and K&N filter.

Last edited by Replicant; Dec 30, 2011 at 05:02 AM.
Reply
Old Dec 9, 2011 | 11:09 AM
  #37  
MR2staci's Avatar
Registered User
iTrader: (1)
 
Joined: Dec 2011
Posts: 5
Likes: 0
i need the transfer case. Is it in working order?
Reply
Old Dec 9, 2011 | 11:13 AM
  #38  
Replicant's Avatar
Registered User
 
Joined: Jun 2011
Posts: 129
Likes: 0
From: Queen Creek, AZ
Originally Posted by MR2staci
i need the transfer case. Is it in working order?
Yes, I am not sure if it matters, but it came from an AUTO 4runner with ADD. I swapped all my 5spd stuff in.
Reply
Old Dec 9, 2011 | 11:17 AM
  #39  
MR2staci's Avatar
Registered User
iTrader: (1)
 
Joined: Dec 2011
Posts: 5
Likes: 0
i'll have to look it up to see

mine is stick so im not sure if there is a difference between them or not
Reply
Old Dec 11, 2011 | 10:13 AM
  #40  
glideraz's Avatar
Registered User
 
Joined: Apr 2011
Posts: 163
Likes: 0
From: glendale,az
the auto transfer case is different it is hydraulically controlled and the manual is just that manually controlled totally different
Reply

Thread Tools
Search this Thread

All times are GMT -8. The time now is 10:48 PM.