1st Gen 4Runner & 2nd Gen PU, etc., Stuff for sale....
05-14-2013, 12:20 PM
#104
Going to be updating this soon with lots.... whatever isn't sold through my build thread. ....
See build thread pg 325
Until then......
Downey Mega Travel Ball Joints Sold!
LoPro energy bump stops sold!
OME NEW rear leaf lift (Pending/3 in line)
all OMEmu shox and stabilizer(pending)
Front lift, some gears, newer oem bj's, restored OEM cv's using OEM kit, LCA's worn new OEM bushings, all either pending or available. ... plus more.
Bbl8r 2 update!
See build thread pg 325
Until then......
Downey Mega Travel Ball Joints Sold!
LoPro energy bump stops sold!
OME NEW rear leaf lift (Pending/3 in line)
all OMEmu shox and stabilizer(pending)
Front lift, some gears, newer oem bj's, restored OEM cv's using OEM kit, LCA's worn new OEM bushings, all either pending or available. ... plus more.
Bbl8r 2 update!
05-16-2013, 06:10 AM
#105
Registered User
Join Date: May 2013
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
newbie here
new to the 4runner thing,im looking for the air intake tube from the mass air to the throttle boby for a 89 4runner 4cyl.I in the south bay area(torrance).Also how do you tell what trans is in it,its a 5 speed but I see different "W" markings on posts,how do I tell which one I have?Mine is a base model with nothing fancy(for now).Also maybe looking for a new 5 speed trans for a fair price with no core.I want to keep the orig one and have it rebuilt.Any help or info would help.Thanks
05-20-2013, 02:18 PM
#107
Entire front end is sold. .......EXCEPT for the OEM CV's/restored with OEM boot kit, completely down to the bare, polished pristine shafts, splines and tripod joints and bearings.... $140 for the pair (at or less than same for Autozone china stuff)
Also will have IFS hubs w/new koyo bearings and recently rebuilt manual locking hubs with new OEM O-rings/gaskets and all hardware.......
http://s233.photobucket.com/albums/e...efbrotha/Aisin IFS and SFA Manual Locking Hubs
Will also MAYBE have available the Black Zinc 1995 V6 Toyota - slotted and drilled rotors(maybe 1200 mi on them)
(will sell all together if someone needs spindles/hubs/freewheel manual locking hubs/cv's/rotors/backing plate cut for SW13B 95 T4R calipers.......THE LOT! BUT THIS IS ALL QUALITY AND RESTORED STUFFS with all new seals and bearings and races and so on...... and in trying to help my mom, I want what they're worth, period..... so lets go from there? )
Also will have IFS hubs w/new koyo bearings and recently rebuilt manual locking hubs with new OEM O-rings/gaskets and all hardware.......
http://s233.photobucket.com/albums/e...efbrotha/Aisin IFS and SFA Manual Locking Hubs
Will also MAYBE have available the Black Zinc 1995 V6 Toyota - slotted and drilled rotors(maybe 1200 mi on them)
(will sell all together if someone needs spindles/hubs/freewheel manual locking hubs/cv's/rotors/backing plate cut for SW13B 95 T4R calipers.......THE LOT! BUT THIS IS ALL QUALITY AND RESTORED STUFFS with all new seals and bearings and races and so on...... and in trying to help my mom, I want what they're worth, period..... so lets go from there? )
Last edited by ChefYota4x4; 05-20-2013 at 02:20 PM.
05-21-2013, 06:40 AM
#108
Registered User
Chef
I am on my work computer and can't see the CV's (protected stuff), but I am interested. I guess I will put my name on the CV's, if you want to ship. Let me know if you have any ideas on how you want to handle the shipping.
I am on my work computer and can't see the CV's (protected stuff), but I am interested. I guess I will put my name on the CV's, if you want to ship. Let me know if you have any ideas on how you want to handle the shipping.
05-21-2013, 02:39 PM
#109
Hey Snobdds! How U been?
Well, someone local dib'd the CV's.... BUT..... , I am going to disassemble and fully mic and inspect ANOTHER set I have..... I wasn't going to, but I think they would just sit around, and they got very little use throughout their life... So if you would like a set also I could order another boot and resto kit and restore them for you? I got pretty good at it and I think I can say without too much argument that I do a very thorough job. Let me know, okay? I don't think shipping would be too horrible as long as I can limit the size of the container. I have a very heavy duty foam that I can and encapsulate them in a small enough box that the shipping wouldn't be too bad. As I mentioned before I believe my buddy at Toyota told me that when they do the remand versions of the Toyota CV's they charge $150 each or so wholesale?
Well, someone local dib'd the CV's.... BUT..... , I am going to disassemble and fully mic and inspect ANOTHER set I have..... I wasn't going to, but I think they would just sit around, and they got very little use throughout their life... So if you would like a set also I could order another boot and resto kit and restore them for you? I got pretty good at it and I think I can say without too much argument that I do a very thorough job. Let me know, okay? I don't think shipping would be too horrible as long as I can limit the size of the container. I have a very heavy duty foam that I can and encapsulate them in a small enough box that the shipping wouldn't be too bad. As I mentioned before I believe my buddy at Toyota told me that when they do the remand versions of the Toyota CV's they charge $150 each or so wholesale?
05-21-2013, 03:33 PM
#112
Registered User
Hey Snobdds! How U been?
Well, someone local dib'd the CV's.... BUT..... , I am going to disassemble and fully mic and inspect ANOTHER set I have..... I wasn't going to, but I think they would just sit around, and they got very little use throughout their life... So if you would like a set also I could order another boot and resto kit and restore them for you? I got pretty good at it and I think I can say without too much argument that I do a very thorough job. Let me know, okay? I don't think shipping would be too horrible as long as I can limit the size of the container. I have a very heavy duty foam that I can and encapsulate them in a small enough box that the shipping wouldn't be too bad. As I mentioned before I believe my buddy at Toyota told me that when they do the remand versions of the Toyota CV's they charge $150 each or so wholesale?
Well, someone local dib'd the CV's.... BUT..... , I am going to disassemble and fully mic and inspect ANOTHER set I have..... I wasn't going to, but I think they would just sit around, and they got very little use throughout their life... So if you would like a set also I could order another boot and resto kit and restore them for you? I got pretty good at it and I think I can say without too much argument that I do a very thorough job. Let me know, okay? I don't think shipping would be too horrible as long as I can limit the size of the container. I have a very heavy duty foam that I can and encapsulate them in a small enough box that the shipping wouldn't be too bad. As I mentioned before I believe my buddy at Toyota told me that when they do the remand versions of the Toyota CV's they charge $150 each or so wholesale?
05-23-2013, 06:06 PM
#113
If they are OEM CV's...go for it. I would rather you do the job then me... because I am still on my originals. I am getting parts in order for my front end work I will be doing at the end of the summer. So take your time and let me know when I need to paypal you the money...
Just going like crazy getting prepped and parts'd up for the pending SASsy! Lol
06-05-2013, 01:50 PM
#117
Sorry, do not, LOS182....
Bay cities radiator Inc. (310)˟978-4549
I believe they are under 1 (800) RADIATOR as well.... The only reason I will only mention this place is because it's the only place that I've ever dealt with. They got me a radiator that Toyota made which was very difficult for anyone else to locate..( except of course for Toyota who only wanted $585) . They actually made it for me. On my trailer package model the lower hose inlet was for inches over from the corner unlike most any other radiator. They promise most everything to be better than OEM quality, and the radiator I got from them around 15,000 miles ago is spotless and working flawlessly. I'm sure you can find something closer to you that deals with quality as well... I'm sorry I couldn't help you with the used one answer that you probably wanted. Best wishes
Bay cities radiator Inc. (310)˟978-4549
I believe they are under 1 (800) RADIATOR as well.... The only reason I will only mention this place is because it's the only place that I've ever dealt with. They got me a radiator that Toyota made which was very difficult for anyone else to locate..( except of course for Toyota who only wanted $585) . They actually made it for me. On my trailer package model the lower hose inlet was for inches over from the corner unlike most any other radiator. They promise most everything to be better than OEM quality, and the radiator I got from them around 15,000 miles ago is spotless and working flawlessly. I'm sure you can find something closer to you that deals with quality as well... I'm sorry I couldn't help you with the used one answer that you probably wanted. Best wishes
06-05-2013, 07:46 PM
#118
90274 Zip:
Selling my 4 BFG 31x10.50x15 and one LeMans 31x10.50x15, all on Aluminum SR5 Rims....
The BFG's haven't even broken the horizontal indicator tabs!
180$ shipped from Summit, 175$ everywhere else..... , + tax = $192.50 + $15 mounting and balance = $207.50 .... x 4 = $830.00 !!! .... Add the spare LeMans has excellent tread/75%..... and that's another WHATEVER, even at another hundred dollars you're already near $1000 for 5 tires mounted and balanced .... and those prices are with NOOOOO wheels! ....
I have all 5 mounted and balanced on SR5 rims for $700 !!!
This is the last time I will list this on my build thread & now my parts thread.... then it goes to CRAIGSLIST..... (Local pickup unless you have a dock I can ship a pallet to... Even then would prefer local)
I would really rather not deal with Craigslist on this dollar amount item... And honestly I really don't want strange people seeing all the crap in my garage.
I am in no way desperate, but would like to get rid of things that I am NOT going to use that would help fund further things... Along with the fact that I would like somebody cool from this site, especially somebody that I know, to get these tires and wheels!
LeMans A/T ......
Rims.....
*****************************************
I am also selling my LC header and I know that a couple people on here are looking into that... I actually know somebody that was definitely going to do it but that are now actually selling their truck due to circumstances unseen coming along...
$250.00 for a $400.00 header that was used for around 4,000 miles.... ? I think that's more than fair. It comes with the pipe from the collector to the cat and actually still have the cat attached to it....$25 more if u want it (can gut it and run a hollow cat thats only a few thousand miles old... Not sure its working well or not, so I grabbed a new one) If you do not want the cat I will cut it off and also include the separate tapered 3/8 flanged connector/ pipe adapter I have in the shop.
Selling my 4 BFG 31x10.50x15 and one LeMans 31x10.50x15, all on Aluminum SR5 Rims....
The BFG's haven't even broken the horizontal indicator tabs!
180$ shipped from Summit, 175$ everywhere else..... , + tax = $192.50 + $15 mounting and balance = $207.50 .... x 4 = $830.00 !!! .... Add the spare LeMans has excellent tread/75%..... and that's another WHATEVER, even at another hundred dollars you're already near $1000 for 5 tires mounted and balanced .... and those prices are with NOOOOO wheels! ....
I have all 5 mounted and balanced on SR5 rims for $700 !!!
This is the last time I will list this on my build thread & now my parts thread.... then it goes to CRAIGSLIST..... (Local pickup unless you have a dock I can ship a pallet to... Even then would prefer local)
I would really rather not deal with Craigslist on this dollar amount item... And honestly I really don't want strange people seeing all the crap in my garage.
I am in no way desperate, but would like to get rid of things that I am NOT going to use that would help fund further things... Along with the fact that I would like somebody cool from this site, especially somebody that I know, to get these tires and wheels!
LeMans A/T ......
Rims.....
*****************************************
I am also selling my LC header and I know that a couple people on here are looking into that... I actually know somebody that was definitely going to do it but that are now actually selling their truck due to circumstances unseen coming along...
$250.00 for a $400.00 header that was used for around 4,000 miles.... ? I think that's more than fair. It comes with the pipe from the collector to the cat and actually still have the cat attached to it....$25 more if u want it (can gut it and run a hollow cat thats only a few thousand miles old... Not sure its working well or not, so I grabbed a new one) If you do not want the cat I will cut it off and also include the separate tapered 3/8 flanged connector/ pipe adapter I have in the shop.
06-25-2013, 09:35 AM
#120
Registered User
god damn it why do i have to be poor you have a few goodies i want, happen to have the plastic for around the shifters from that 88 you got a lot of goodies from? i might also be intereste din the 88 ecu, nice to have a spare thats for sure. I will text ya when i know for sure
