Running board install
#1
Registered User
Thread Starter
Join Date: Jul 2003
Location: N. Virgina
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Running board install
Hey guys,
I am trying t install my lighted running boards. Here is a pic of the end of the connectors that were already on the wires when i removed them form my old 4runner.
I remember unpluging these from my some spot behind the ignition.
Only problem is that I don't see any place to connect these on the back of the ignition on my 04. Does any one know where to plug these in so that they can light up when I unlock the car or open the doors.
Maybe some of you that removed your running boards could help me out.
I am trying t install my lighted running boards. Here is a pic of the end of the connectors that were already on the wires when i removed them form my old 4runner.
I remember unpluging these from my some spot behind the ignition.
Only problem is that I don't see any place to connect these on the back of the ignition on my 04. Does any one know where to plug these in so that they can light up when I unlock the car or open the doors.
Maybe some of you that removed your running boards could help me out.
#7
are the lighted running boards on the 2000 4runner limited? If so, the truck is probably already wired for them, just look under the door threshold to see if there are connectors. I have realized that toyota wires for everything, then just adds the extra components, ex: fog lights on the 2000 sr5. On the boards from the factory, do the lights come on when locking/unlocking with the remote, when opening a door, or both?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
09-09-2015 06:24 AM
skoti89
Offroad Tech
3
07-08-2015 12:05 AM