How many quarts in trans after flush?
#1
Registered User
Thread Starter
Join Date: Oct 2010
Location: Penn Valley, CA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
How many quarts in trans after flush?
I just had to flush my trans out after the pink milkshake. Now I have the B&M 70264 cooler but think I used way to mush fluid. I refiled with 8Qts and it reads pretty high on the dip stick. The book said 10 so I thought I'd leave 2 to spare. I'm guessing the torque converter didn't empty out. Way to much hugh? Probly should have been like 4Qts right?
Last edited by Bawlzdeep; 05-05-2011 at 05:55 PM.
#2
Registered User
yeah drain it out tell u get it into the right range, u could screw up the trans if u dont, and after driving it for a day check it and make sure its still with in specs. also look in the fsm for the right amount im not sure on how much to flush it.
#3
Registered User
http://home.centurytel.net/stevenjac...sh/tranny.html
About 16qts to flush the system. Only about 4-5qts in the pan if you just drain it. When I dropped my pan I had about 6.5qts poured into the bucket.
About 16qts to flush the system. Only about 4-5qts in the pan if you just drain it. When I dropped my pan I had about 6.5qts poured into the bucket.
#5
Registered User
Thread Starter
Join Date: Oct 2010
Location: Penn Valley, CA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I drained it and put 3Qts back in. Gonna go camping tonight so I'm bringing another 2 qts with to top it off after I get a good op temp reading.
Thread
Thread Starter
Forum
Replies
Last Post