bumper ready and coated
#1
Contributing Member
Thread Starter
Join Date: May 2003
Location: the Netherlands
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
bumper ready and coated
As posted before I was allmost ready with my front bumper last week.
I had the bumper zinc plated and coated this week. I just mounted it but still have to hook up the Hella's and winch.
The signal lights (hard to see) are from a VW Golf. I ordered some black covers for them and they blend in very nice with the bumper. They still light up okay though.
The beams are a set of Hella Comet's.
I cut out a lot of slots and holes to provide plenty of air flow into the radiator. The 7M-GE gets kinda hot and needs the air flow.
I build it so I could easily operate the clutch and have a good vision on how the steelcable winds onto the drum.
Sorry for the dark pic but we have some bad weather over here.
I estimate the entire project (sheetmetal, bending, lights, coating etc. cost me $ 500. Not bad at all I guess.
I had the bumper zinc plated and coated this week. I just mounted it but still have to hook up the Hella's and winch.
The signal lights (hard to see) are from a VW Golf. I ordered some black covers for them and they blend in very nice with the bumper. They still light up okay though.
The beams are a set of Hella Comet's.
I cut out a lot of slots and holes to provide plenty of air flow into the radiator. The 7M-GE gets kinda hot and needs the air flow.
I build it so I could easily operate the clutch and have a good vision on how the steelcable winds onto the drum.
Sorry for the dark pic but we have some bad weather over here.
I estimate the entire project (sheetmetal, bending, lights, coating etc. cost me $ 500. Not bad at all I guess.
Trending Topics
#8
Contributing Member
Thread Starter
Join Date: May 2003
Location: the Netherlands
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the compliments guys. Actually I want to get rid of all the chrome. The grille and headlights are no problem but I have no clue how to paint that stainless steel window trim. The grille and corners are aftermarket and their quality sucks. I never seen a chrome plastic grille which rusts so badly. :pat:
I will replace the rearbumper also with a new unit, similar to the front one. Or maybe strenghten it from the inside and powdercoat it black because I like the look of the rearbumper.
And yes, I have documented how I made it. I also have some drawings for bending the sheetmetal plus a partslist of what tools are needed. If anybody is interested I can do a quick write-up somewere next week.
It stopped raining so I can make a decent pic today as soon as I hook up all the electrics.
I will replace the rearbumper also with a new unit, similar to the front one. Or maybe strenghten it from the inside and powdercoat it black because I like the look of the rearbumper.
And yes, I have documented how I made it. I also have some drawings for bending the sheetmetal plus a partslist of what tools are needed. If anybody is interested I can do a quick write-up somewere next week.
It stopped raining so I can make a decent pic today as soon as I hook up all the electrics.
#11
Contributing Member
Thread Starter
Join Date: May 2003
Location: the Netherlands
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by <96 Runner>
I would like to hear and see more of your avatar picture, that looks crazy from this view.
You can't see it but I used to run a 4" lift, 1" bodylift and 33"s.
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
06-11-2017 08:36 PM
FS[MidWest]: OEM Toyota FJ Wheels 2007-2010 $500
dbd6604
Axles - Suspensions - Tires - Wheels
2
10-11-2015 05:30 PM
mirabile4runner
Misc Stuff (Vehicle Related)
0
09-03-2015 07:15 AM