chrome univeral 3-section brushgard with light mounts, $75+(1/2 ship)......[pics]
#1
Registered User
Thread Starter
Join Date: May 2007
Location: used to be so. cal. now Indy
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
chrome univeral 3-section brushgard with light mounts, $75+(1/2 ship)......[pics]
this is the same ones selling $155+30shipping on ebay. i bought for $130 because the mounting hardwares were missing. i've decided to move up to a Bigrock Off-road tube winch bumper.
1 month old on my rig. it needs 4 bolts to mount on the steel bumper, pretty straight up. i had a shop riged some 3/8" thread rods, i will include them in the deal too.
you can mount everything include the middle section and 2 headlight grills, or just the middle section using as a bullbar. you can mount the lights on the top bar or switch to the buttom. reason i had the light mounts on the top because the 6" Hella 500 lights won't fit on the buttom.
$80 for the whole thing and i pay whatever half of the shipping cost is.
contributing members, your word is your money, you send me the check i ship it to you the same time so you dont' have to wait for it.
#5
Registered User
Join Date: Dec 2006
Location: Wilkes Barre Pa.
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
I will be third in line
e mail ozzydg55@aol.com
e mail ozzydg55@aol.com
#6
Registered User
Thread Starter
Join Date: May 2007
Location: used to be so. cal. now Indy
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
ok, guys, here are the close-up pictures:
it's kinda tricky to mount on the bumper, thou. that's why i took it to a shop to have it done.
basically they drilled 2 holes on the veritcal side of the bumper first, then 2 other holes on the top. the 2 tabs on each side are not 90 degrees. it didn't come with the original nuts and bolts when i bought it, that's why the shop made these 3/8" thread rods.
there are few guys emailed and pm'd me, and i have replied. but i was on the road since thursday, so i don't really remember who still wants it or who's first.
so please let me and others know if you don't want it. just trying to be fair.
thanks.
edit: note i don't have my plastic valance under the chrome bumper, if you have it on yours, it may in the way.
there are 2 light mounting tabs on one of the horizontal bars, it can be switched whatever the way you want with an allen wrench.
it's kinda tricky to mount on the bumper, thou. that's why i took it to a shop to have it done.
basically they drilled 2 holes on the veritcal side of the bumper first, then 2 other holes on the top. the 2 tabs on each side are not 90 degrees. it didn't come with the original nuts and bolts when i bought it, that's why the shop made these 3/8" thread rods.
there are few guys emailed and pm'd me, and i have replied. but i was on the road since thursday, so i don't really remember who still wants it or who's first.
so please let me and others know if you don't want it. just trying to be fair.
thanks.
edit: note i don't have my plastic valance under the chrome bumper, if you have it on yours, it may in the way.
there are 2 light mounting tabs on one of the horizontal bars, it can be switched whatever the way you want with an allen wrench.
Last edited by TC4RNR; 09-04-2007 at 03:16 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
Johntom240
General Electrical & Lighting Related Topics
7
07-13-2015 12:18 AM
jon.r
General Vehicle Related Topics (Non Year Related)
8
07-11-2015 03:34 PM