86 Runner AFM (air flow meter) issues
#1
Registered User
Thread Starter
Join Date: Jan 2012
Location: New Mexico
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
86 Runner AFM (air flow meter) issues
1986 4runner, 22R-E, non-turbo We fixed the engine loping on other a thread. Now the runner will turn over and the AFM flap bangs sometimes but not others, without ever starting. When I disconnect the tube from the AFM to the throttle body and prop the flap open it starts just fine. I can reconnect the tube after a min and the 4runner idles just fine and runs. I did both resistance tests on the AFM. The AFM terminals to ground looked good. The AFM terminal to terminal tests looked ok a few were on the high side. I have a better volt meter so I will check on these this afternoon. I checked the engine codes and got the following errors: O2 sensor, AFM, AFM temperature. I also checked the brain box and everything looks good there. I suspect there is something goofy with the AFM and need to replace it. But are there other sensors plugged into the system I should check? I took a look at the wiring diagram but I am not so good with those things. Thanks, ara
#2
Registered User
It sounds like you have a bad AFM for sure. If the 02 sensor is original with alot of miles on it, im sure its bad or weak also. Replace it with a Denso 02 sensor, do not use a Bosch 02 sensor, they don`t work in toyotas.
You can get an 02 sensor here. www.densoproducts.com
You can get an 02 sensor here. www.densoproducts.com
Thread
Thread Starter
Forum
Replies
Last Post
Team420
95.5-2004 Tacomas & 96-2002 4Runners
4
01-12-2021 04:57 PM
bigblue82
General Electrical & Lighting Related Topics
10
07-06-2015 08:27 AM
Peteyg39@hotmail.com
Newbie Tech Section
1
06-26-2015 08:15 AM