Installing a new carrier with the same gears
#1
Registered User
Thread Starter
Join Date: Jul 2005
Location: Northglenn, CO
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Installing a new carrier with the same gears
A buddy of mine upgraded his LS to a full locker and gave me the LS.
It already has good bearings on it, and I have a spare diff that is set up.
Can I pull the carrier, remove the ring gear, put it on the LS carrier and put it back in? Will it still be setup good if I use all the same shims and clock the adjusting nut the same number of turns?
Will I still need to check runout and backlash? I will at least check the pattern, but didn't know if everything will be needed since I'm staying with the same gears.
Sorry for the newb qustion, but I've never set up a diff before and all the instructions I've found are for regearing.
TIA
It already has good bearings on it, and I have a spare diff that is set up.
Can I pull the carrier, remove the ring gear, put it on the LS carrier and put it back in? Will it still be setup good if I use all the same shims and clock the adjusting nut the same number of turns?
Will I still need to check runout and backlash? I will at least check the pattern, but didn't know if everything will be needed since I'm staying with the same gears.
Sorry for the newb qustion, but I've never set up a diff before and all the instructions I've found are for regearing.
TIA
#3
Registered User
Thread Starter
Join Date: Jul 2005
Location: Northglenn, CO
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
I have looked on his site before and it was very helpful, but again I only read the new gear installs and didn't see the same gear installs.
I just found one of his installs that explains exactly what I'm asking.
Thanks
http://gearinstalls.com/v6lockrite.htm
I just found one of his installs that explains exactly what I'm asking.
Thanks
http://gearinstalls.com/v6lockrite.htm
Thread
Thread Starter
Forum
Replies
Last Post
XtraCab
Solid Axle Swaps, All Years
18
04-12-2020 05:25 AM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM