tom_mag

I have 154,000 miles on my 2000 2.7L auto runner. It is starting to shift a little sloppy when stuck in traffic, and when doing three point turns. Is their anything I can do to make it shift a little firmer? On old American cars you can get a kit for 25 bucks, drill out a hole and install it between the valve body and you can get anything from slightly firmer to tire barking shifts. Is their anything like that for our Toyotas? Can it be done with line pressure or a computer chip?

paddlenbike

iTrader: (1)

URD makes them.

Has anyone tried using one yet?

Here is the link.

cheap sunglasses

That URD product is a short throw shifter for manual transmissions. Completely different thing despite the similar name. I have heard good reviews of it though, paddlenbike. Try searching TTORA.

tom_mag I hate to say it but I doubt you will find anything. Not saying you won't but I have never heard of a valvebody kit or chip for a toyota, even the newer ones. Companies like B&M focus on domestic vehicles, although in the future they wont be able to ignore imports, with the direction the auto industry seems to be headed.

paddlenbike

iTrader: (1)

Sorry, I completely missed the auto part. It has been a long day...

91TPU

change your fluid, other then that there is really not much, not to sound like an jerk but you bought an auto, and autos get sloppy after they gain mileage. sorry man

bamachem

you can get your valve body modified at IPT for about $600 and it will clean up the shifts. however, it sounds to me like you need a good flush and some fresh fluid.

desertyota

There was some company offering something for this. Had a kit that would allow you to control the shifting and lock up the torque converter stuff like that. I'll see if I can find it again.

97Limited

Doesn't "Level 10" make A kit for the Auto Tranny???

http://www.levelten.com/store/import...ges/toyota.htm

SteelHound

Seafoam Trans will clean it up

desertyota

Linky no worky

JHRRLD

http://www.importperformancetrans.com/toyotaauto.shtml

Look for valve body on this page. IPT is the best.

Ironmike4x4

Talk to Mark, midiwall a PM and he can probably give you more details. He's more performance oriented but I'm sure he can tell you about it.

tom_mag

Thanks for the info guys. I noticed that I had somehow turned off the ECT power button on my tranny and that was the biggest part of the problem.

I'll change the fluid again just to be on the safe side.

881stGenRunner

https://www.yotatech.com/forums/f2/new-product-announcement-manual-control-your-automatic-transmission-89502/
Here is the thread that one of yall mentioned about being able to manually control each shift, but without having to use a clutch. It is really pretty cool.

Jim McNabb

Level 10 & IPT offer the same service, modifying the valve body, the only difference is the price. Level 10 advertises $ 700. while IPT says $ 525.
Shipping is extra. They are both in New Jersey.
You have to remove the valve body yourself & send it off for the service which takes about a week.
I can't believe they are the only two in the entire country that can perform this service. It would be nice to find someone out west !! Oh well.....

MTL_4runner

I think John over at IPT used to work for Level 10......which makes sense why they are both in NJ.

toyota_mdt_tech

Wont be such an animal. Back in the old hydralically operated trannies, you could toss out check balls, drill large holes int ehj separator plate and toss out a bunch of accumulator springs. But now days, shifts are all electrocnially controlled. But there is no reason why one couldnt figure out how to reprogram the ECU's. Some computer nerd should be able to do it.

jusfloorit

You also mentioned that it is shifting sloppy while in traffic. Might I recommend a trans cooler? Any bigger tire is gonna put stress on the trans, especially the converter. The converter uses fluid to create stall and in doing so it heats up the fluid. A cooler will keep temps down and she should shift like when you first start her up, all the time. Good luck.

toy4crawlin

Did some research

R150 trans is in my 92 4Runner 4x4 and also the 95-2004 tacoma

so you can get a great deal on a B&M Short Shifter on EBAY

Ri

MTL_4runner

This is how people have been upgrading the trannys for some time now.
http://www.gadgetonline.com/Transmis...tm#Prevention:

Here's where John from IPT talked about what was in the "valvebody upgrade":
https://www.yotatech.com/forums/f2/whats-valve-body-upgrade-27512/

Writeup of the removal/install with pics:
http://members.cox.net/mgriese5/Level10.html

As a Toyota Tech I'd be interested to hear your thoughts on this because they are clearly not doing any ECU programming. They have a few fancy names for the service like "hydrobalancing" or whatnot, but they are obviously mechanically changing fluid passages (along with a new set of springs......may add/remove checkballs too, not sure) since all you need to do is send them your valve body. Hard to get any info on what exactly is being done technically because they are trying to protect their business interests (no surprise there). Too bad no one ever took a highres photo of the valvebody (fluid passage side) before/after so you could see what was changed. It seems this service works similarly on many of the import vehicles, all of which are computer controlled now.