fender flares

theschmitty13 · 07-14-2009, 03:40 PM

i have an 87 4runner with dana 60 in back and 44 up front with 35's and the wheels stick out about 2 inches i think i am going to get some fender flares but i don't want to loose any wheel clearance in the back. i would want some cut out flares but i don't know if they make those for the back. Does anybody have any on their vehicles and if so please post some picks.

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

4Crawler · 07-14-2009, 06:31 PM

Bushwacker Cutout flares may do the trick, a bit wider than you need, no real cutting in back, a little up front:

or else cut out the rear fenders, fill in the inner wheel well and put on some cut-to-fit rubber flares, which is what I plan to do to replace my old B/W flares.

I have my planned cutting line shown below:

theschmitty13 · 07-15-2009, 05:47 PM

sounds good post picks when you do cause that sounds like a good idea

07-14-2009, 06:31 PM	#2 (permalink)
4Crawler Contributing Member Join Date: Jun 2002 Location: SF Bay Area, CA Posts: 7,828	Bushwacker Cutout flares may do the trick, a bit wider than you need, no real cutting in back, a little up front: or else cut out the rear fenders, fill in the inner wheel well and put on some cut-to-fit rubber flares, which is what I plan to do to replace my old B/W flares. I have my planned cutting line shown below: __________________ 1985 Toyota 4Runner SR-5, 22REC engine, dual t-cases, 4.88 gears, dual ARBs, 33x10.50 BFGs or 35x12.50 MTRs r.c.brown@ieee.org TruckEditor@tlca.org Project: 4Crawler 4Crawler OffRoad Gettin'Off 4WD Club

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-15-2009, 05:47 PM	#3 (permalink)
theschmitty13 Registered User Join Date: Apr 2009 Posts: 4	sounds good post picks when you do cause that sounds like a good idea