Scuba's 99 Tacoma
#2
Registered User
Thread Starter
Ive gotten a few things done..
Pulled the Add-A-Leafs cause they rode like ass.
Cb Antennae Mount
And De-Chromed the Fenders
Oh, I finally got around to putting my 1 Kicker 10" and 300X1 amp in, Much better
And recieved some parts
OME 881's and N91S's, Lockright Rear locker, Toyota mini header conversion, The headers are in, Locker will be in on 5/3, And lift will be done when I get funds for the rear springs..
Oh, And heres some non poser shots from Calico a couple weekends back
Cb Antennae Mount
And De-Chromed the Fenders
Oh, I finally got around to putting my 1 Kicker 10" and 300X1 amp in, Much better
And recieved some parts
OME 881's and N91S's, Lockright Rear locker, Toyota mini header conversion, The headers are in, Locker will be in on 5/3, And lift will be done when I get funds for the rear springs..
Oh, And heres some non poser shots from Calico a couple weekends back
#3
Registered User
Thread Starter
So while I was posting that ^^
I was waiting for the exhaust to cool down so I could finish pulling this..
Initial thoughts, Not really noticeable when turning from a dead stop like a stop sign or something, But going about 40-50 and purposely slightly jerking the wheel back in forth I could deff tell it wasnt there.
I crawled a few malls and drove around town a bit and im gettin used to it.
The drive to work tomorrow is very curvy, So I guess that'll be a good time to get used to it more..
I was waiting for the exhaust to cool down so I could finish pulling this..
Initial thoughts, Not really noticeable when turning from a dead stop like a stop sign or something, But going about 40-50 and purposely slightly jerking the wheel back in forth I could deff tell it wasnt there.
I crawled a few malls and drove around town a bit and im gettin used to it.
The drive to work tomorrow is very curvy, So I guess that'll be a good time to get used to it more..
#4
Registered User
Thread Starter
Today was payday
So I couldnt help myself.
Hit up ORW cause ive been in need of auto tire deflate thingys, got those.
And I picked up some of these
Took maybe 5 mins to get this done...
Hit up ORW cause ive been in need of auto tire deflate thingys, got those.
And I picked up some of these
Took maybe 5 mins to get this done...
#6
Registered User
Thread Starter
Lift Shocks and things...
All-Pro 3" rear springs, U bolt flip kit, Ext brake lines Bilstien 5150 10"ers. OME 881 fronts with N91S's
Before:
After:
Underneath :
This is how she'll flex with still another 1" before bumpstops, Oh lil bit of body damage :
DELL, If you ever read this THANK YOU !!!!
Before:
After:
Underneath :
This is how she'll flex with still another 1" before bumpstops, Oh lil bit of body damage :
DELL, If you ever read this THANK YOU !!!!
Last edited by scuba; 06-02-2009 at 10:08 PM.
#7
Registered User
Thread Starter
Well its been a while.
Here it all is in a nut shell.
Got the 33's on a couple weeks back.
This weekend.
Last weekend.
My Taco and my dads 99 4Runner.
Oh, 21 MPG Higway, ~~16-17 Mixed. Not bad I say.
Oh, And just did a tuneup : Fuel filter, Air filter, PVC valve and grommet, plugs, Tcase, Trans, And front diff ( rear was done with locker install like 4k ago so not worried about it ) ;
Zerks all around were hit about 2 weeks ago (I think the rear drive shaft needs new U's as well as shaft seals on the slip yoke.)
SOO, Up next.
Budbuilts are my birthday present, Exactly one month from today ill be 19
They'll be on the way soon.
After that im thinking front locker.
Somewhere in between those two will be a bed bob, Cause the bed is just too damn long
Hope you enjoy
Here it all is in a nut shell.
Got the 33's on a couple weeks back.
This weekend.
Last weekend.
My Taco and my dads 99 4Runner.
Oh, 21 MPG Higway, ~~16-17 Mixed. Not bad I say.
Oh, And just did a tuneup : Fuel filter, Air filter, PVC valve and grommet, plugs, Tcase, Trans, And front diff ( rear was done with locker install like 4k ago so not worried about it ) ;
Zerks all around were hit about 2 weeks ago (I think the rear drive shaft needs new U's as well as shaft seals on the slip yoke.)
SOO, Up next.
Budbuilts are my birthday present, Exactly one month from today ill be 19
They'll be on the way soon.
After that im thinking front locker.
Somewhere in between those two will be a bed bob, Cause the bed is just too damn long
Hope you enjoy
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
LCE_Performance
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
0
10-01-2015 01:03 PM
bryan34w
Buying & Selling Advice - Feeler/Gauging Interest
12
09-30-2015 02:50 PM
charlie_fong
General Vehicle Related Topics (Non Year Related)
0
09-27-2015 10:06 PM