Limit straps for rear superlift kit
11-05-2006, 09:18 AM
#1
Registered User
Thread Starter
Join Date: May 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Limit straps for rear superlift kit
I am installing a superlift rear suspension lift in my 1992 4Runner and need to know where to mount the upper ends of the limit straps. The pictures that are suppose to be in the instructions are missing. Very bad instruction actually for a well rated suspension kit.
I have the rear coil spring suspension and I know that I mount the lower end of the strap to the lower shock mount but it says to mount the upper end in a hole i have to drill which is shown in diagram that is missing. Can somone maybe post a picture or give a good description of where to drill the whole to mount the upper end please.
I have the rear coil spring suspension and I know that I mount the lower end of the strap to the lower shock mount but it says to mount the upper end in a hole i have to drill which is shown in diagram that is missing. Can somone maybe post a picture or give a good description of where to drill the whole to mount the upper end please.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
XtraCab
Solid Axle Swaps, All Years
18
04-12-2020 05:25 AM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
