Pictorial of my Dynomax-Monza install
#1
Registered User
Thread Starter
Pictorial of my Dynomax-Monza install
Hey guys,
I finally put together that pictorial. Not my best work but I'm pressed for time these days. See it here:
http://www.4runners.org/images/exhau...omax/index.htm
Bob
I finally put together that pictorial. Not my best work but I'm pressed for time these days. See it here:
http://www.4runners.org/images/exhau...omax/index.htm
Bob
#4
Registered User
Join Date: May 2002
Location: Boyertown, Pa
Posts: 1,853
Likes: 0
Received 0 Likes
on
0 Posts
Hey, very cool. LOL...did they yell at you for taking too many pictures. Just joking. Lots of pictures are good. Nice write up too. Way to go! Thanks! :fireman:
#5
Registered User
Thread Starter
BTT for SLC's viewing pleasure
#6
yeah looks nice! i hope it helps your gas mileage or preformance or something otherwise you could have just gotten the tip.... but now you can say you have a dynomax exhaust!!!! and you have a reason to celebrate!
#7
Contributing Member
Join Date: Jul 2002
Location: SLC, UT
Posts: 5,862
Likes: 0
Received 0 Likes
on
0 Posts
Re: BTT for SLC's viewing pleasure
Originally posted by Bob_98SR5
here ya go, SLC...
http://www.4runners.org/images/exhau...omax/index.htm
Bob
here ya go, SLC...
http://www.4runners.org/images/exhau...omax/index.htm
Bob
So let me get this right, you have a dynomax muffler, resignator, and tip...
Trending Topics
#9
Registered User
Thread Starter
SLC:
I have on the 99 the Dynomax muffler and the Monza resonator tip. Since the muffler shop fab'd the dynomax w/ mandrel bent tubes w/ flanges, theoretically I can bolt that thing on and off any 3rd gen 4runner. We'll see if that holds true this weekened as I am going to take it off the 99 and put it on the 98.
As I can't take off the Monza tip off the 99, I'm gonna give the 98 a shot w/o the Monza tip. I'm gonna see if it really is as bad (resonance) as some members have said it is.
Bob
I have on the 99 the Dynomax muffler and the Monza resonator tip. Since the muffler shop fab'd the dynomax w/ mandrel bent tubes w/ flanges, theoretically I can bolt that thing on and off any 3rd gen 4runner. We'll see if that holds true this weekened as I am going to take it off the 99 and put it on the 98.
As I can't take off the Monza tip off the 99, I'm gonna give the 98 a shot w/o the Monza tip. I'm gonna see if it really is as bad (resonance) as some members have said it is.
Bob
#10
Registered User
Thread Starter
Turbo:
There has been alot of debate whether the tube size is 2.25 or 2.5. We measured it, did the calculations, etc and mine was 2.5. I purchased a Dynomax w/ 2.25 inlet/outlet and the guys had to expand it w/ their expander machine (or whatever its called) to 2.5.
If I were you, I'd go out and measure your pipe to make sure.
Bob
There has been alot of debate whether the tube size is 2.25 or 2.5. We measured it, did the calculations, etc and mine was 2.5. I purchased a Dynomax w/ 2.25 inlet/outlet and the guys had to expand it w/ their expander machine (or whatever its called) to 2.5.
If I were you, I'd go out and measure your pipe to make sure.
Bob
Thread
Thread Starter
Forum
Replies
Last Post
punks_is_4x4
86-95 Trucks & 4Runners
10
08-21-2015 01:35 PM
Esibnitsud
86-95 Trucks & 4Runners
0
07-30-2015 08:19 PM