Pics of my rig..W/new Sliders (Dallas area people..please look at)

Spectre · 03-07-2004, 01:33 PM

First off I want to say thank you very much to Richard Stubbs for his quality work. These Sliders are nothing short of a work of art. Not only that, Mr. Stubbs went way out of his way to find me a good welder in the Dallas area for me to go to. Who did he find? Ed Westerbeck!! This guy was in a few 4x4 mags a little while ago for the work he did on a rig called the RockTaxi. This guy is top notch with a torch in his hand and a top notch/stand up guy too boot. It was such a pleasure to have this guy work on my rig. I highly recomend this guy to anyone in the Dallas Area is email is ed@rocktaxi.com ( how fitting right

) ckeck out his page...even if it is a jeep http://www.rockcrawler.com/readersri...er01/index.asp

Also on a side note..his jeep is gone and he will shortly be working on restoring an old FJ-40..he is a toyota guy at heart I believe

Also Mr. Stubbs, Ed could not stop saying how great your sliders look and what quality work you do. He is going to start Recommending them to anyone who asks....
Anyone ready for some poser pics??

And I think my dog Shelby likes them better then anyone

Here is my other dog SPECTRE being a sick lil'bastard

***Corey*** · 03-07-2004, 01:39 PM

I can not see the pics

I'd just link your Webshot links and let us click into them.
That free invis.free site is more trouble than it's worth sometimes, they have very slow servers that time out.

Bob_98SR5 · 03-07-2004, 01:45 PM

herk,

i could open the last 2 but not the first 2.

hey, send them to me at bobkim@4runners.org and i'll post them for 30 days. hows that?

also, resize them to no greater than 600 pixels wide.

bob

Dr. Zhivago · 03-07-2004, 01:45 PM

The problem is the anonymizer proxy you are using. That screws up the urls for anyone outside the proxy which you are tunneling thru.

Drop the anonymizer and post the url without that running.

My .02
G

MTL_4runner · 03-07-2004, 02:09 PM

Quote:

Originally Posted by Dr. Zhivago

The problem is the anonymizer proxy you are using. That screws up the urls for anyone outside the proxy which you are tunneling thru.

Drop the anonymizer and post the url without that running.

My .02
G

I don't think he is using the anonymizer proxy is he?

Herk, just give us your username at webshots so we can find your stuff in the community section.
Then one of us can link them up from there.

Edit: Looks like you got it this time.

MTL_4runner · 03-07-2004, 02:11 PM

Looks great!
OK I WANT SOME!!!

r0cky · 03-07-2004, 05:00 PM

Looks awesome, man! Now where exactly in the Dallas area do you plan on taking it to christen those new sliders?

Spectre · 03-07-2004, 05:12 PM

Quote:

Originally Posted by 4route

Looks awesome, man! Now where exactly in the Dallas area do you plan on taking it to christen those new sliders?

There was a post not too long ago where there were a few Dallas pople who had put out some areas to play in...I will have to dig that up

I want to ride!! ( but again, it will be a while before I can put some money into suspention...and my wife is about ready to pop with our baby soon...)
I will be out in that area again in 5 or 6 weeks

know of any places??

r0cky · 03-07-2004, 05:22 PM

nah, I wish I knew of some places ... but I don't, sorry.

Congratulations about the soon-to-come addition to your family ... it'll be a little cuter than a truck and not need any special suspension before you can fully enjoy it.

Spectre · 03-07-2004, 05:31 PM

Quote:

Originally Posted by 4route

nah, I wish I knew of some places ... but I don't, sorry.

Congratulations about the soon-to-come addition to your family ... it'll be a little cuter than a truck and not need any special suspension before you can fully enjoy it.

Yeah, he will be a free mod

and one that can hand me my tools too

I am going to get him to love to fly..and mud all before he is 2

about Places to ride in Dallas..

http://www.yotatech.com/showthread.p...light=dall as
I have yet to try any of them yet...but wouldn't it be cool to get all the Dallas and Big Country people together to wheel and talk about our rides?

Vato Loco · 03-07-2004, 05:41 PM

The sliders look real good! Looks like the one dog is having a real good time.

Tacoma Dude · 03-08-2004, 02:50 AM

yeah, Shelby looks like she's having a great time!

Nice to see those sliders on your runner! I think your generation runner is the one I like best out of all. The 4th gens are starting to really grow on me though.

X-AWDriver · 03-08-2004, 07:53 AM

Nice sliders,I really want some before summer on my rig.

03-07-2004, 01:33 PM	#1 (permalink)
Spectre Contributing Member Join Date: Nov 2003 Location: Maryville, TN Posts: 1,084	fixedPics of my rig..W/new Sliders (Dallas area people..please look at) First off I want to say thank you very much to Richard Stubbs for his quality work. These Sliders are nothing short of a work of art. Not only that, Mr. Stubbs went way out of his way to find me a good welder in the Dallas area for me to go to. Who did he find? Ed Westerbeck!! This guy was in a few 4x4 mags a little while ago for the work he did on a rig called the RockTaxi. This guy is top notch with a torch in his hand and a top notch/stand up guy too boot. It was such a pleasure to have this guy work on my rig. I highly recomend this guy to anyone in the Dallas Area is email is ed@rocktaxi.com ( how fitting right ) ckeck out his page...even if it is a jeep http://www.rockcrawler.com/readersri...er01/index.asp Also on a side note..his jeep is gone and he will shortly be working on restoring an old FJ-40..he is a toyota guy at heart I believe Also Mr. Stubbs, Ed could not stop saying how great your sliders look and what quality work you do. He is going to start Recommending them to anyone who asks.... Anyone ready for some poser pics?? And I think my dog Shelby likes them better then anyone Here is my other dog SPECTRE being a sick lil'bastard __________________ ~Todd 2001 4Runner V6 SR5 4x4 , Sway-A-Way Racerunners , Old Man Emu rear shocks & coils Last edited by Herkengineer : 03-07-2004 at 05:17 PM.

03-07-2004, 01:39 PM	#2 (permalink)
*Corey* Co-Founder/Administrator Staff Join Date: May 2002 Location: Auburn, Washington Posts: 23,765	I can not see the pics I'd just link your Webshot links and let us click into them. That free invis.free site is more trouble than it's worth sometimes, they have very slow servers that time out. __________________ Corey 2007 FJ Cruiser ARB bumper, Warn XD9000, OME lift, roof top tent, so much more, see my website & buildup thread PNW FJ Cruisers ☺ Detailing 101 ☺ Join Topsites ☺ Muffler Comparisons ☺ Maggiolinas In The Wild FJ Cruiser Buildup ☺ New Roof Top Tent ☺ Video Of My Penthouse ☺ Rehinge Your ARB/Engel Fridge

03-07-2004, 02:11 PM	#6 (permalink)
MTL_4runner Contributing Member Join Date: Jul 2003 Location: Montreal, QC Canada Posts: 8,808	Looks great! OK I WANT SOME!!! __________________ - Jamie 1996 4Runner SR5 4X4 Auto Deckplate Mod, Hayden Tranny Cooler, Amsoil Air Filter, OME 881/906 N86C/N91SC Lift Best OBD II scan tool I have used!. .....and I am AMERICAN!

03-07-2004, 05:41 PM	#11 (permalink)
Vato Loco Registered User Join Date: May 2002 Posts: 3,483	The sliders look real good! Looks like the one dog is having a real good time. __________________ 2005 Toyota Tacoma Access-Cab 4x4 w/ TRD Off-Road Package 33" Goodyear MTR's 3" Toytec Lift Clear Headlights Quick Pic of the Taco My Old Toyota 4Runner Limited, Check It Out!

03-08-2004, 02:50 AM	#12 (permalink)
Tacoma Dude Contributing Member Join Date: Mar 2003 Location: Orange County, CA Posts: 8,377	yeah, Shelby looks like she's having a great time! Nice to see those sliders on your runner! I think your generation runner is the one I like best out of all. The 4th gens are starting to really grow on me though. __________________ Peter! 2002 Tacoma 1986 4Runner

03-07-2004, 01:45 PM	#3 (permalink)
Bob_98SR5 Contributing Member Join Date: May 2002 Location: Los Angeles Posts: 10,115	herk, i could open the last 2 but not the first 2. hey, send them to me at bobkim@4runners.org and i'll post them for 30 days. hows that? also, resize them to no greater than 600 pixels wide. bob

03-07-2004, 01:45 PM	#4 (permalink)
Dr. Zhivago Away Join Date: Oct 2002 Location: Beaverton, OR Posts: 1,598	The problem is the anonymizer proxy you are using. That screws up the urls for anyone outside the proxy which you are tunneling thru. Drop the anonymizer and post the url without that running. My .02 G

03-07-2004, 05:00 PM	#7 (permalink)
r0cky Banned Join Date: Oct 2003 Location: Texas Posts: 5,386	Looks awesome, man! Now where exactly in the Dallas area do you plan on taking it to christen those new sliders?

03-07-2004, 05:22 PM	#9 (permalink)
r0cky Banned Join Date: Oct 2003 Location: Texas Posts: 5,386	nah, I wish I knew of some places ... but I don't, sorry. Congratulations about the soon-to-come addition to your family ... it'll be a little cuter than a truck and not need any special suspension before you can fully enjoy it.

03-08-2004, 07:53 AM	#13 (permalink)
X-AWDriver Contributing Member Join Date: Sep 2003 Location: Littleton,CO Posts: 9,501	Nice sliders,I really want some before summer on my rig. __________________ '99 4Runner Highlander 4wd E-locker,rear diff and deckplate mod * 265/75/16 Nitto TerraGrapplers * Yakima Load Warrior rack * clear corners/signals * Tacoma skidplate * Silverstar lamps/fogs Alpine CDA-9831,Bazooka EL Series 250w amp,MTX 10" sub

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for anyone in the Dallas TX Area	colsoncj	Off Topic Talk	7	01-22-2007 04:23 PM
Dallas - TX: 2nd Gen Stubbs Sliders	Funk_Runner	Misc Stuff (Vehicle Related)	6	02-19-2006 11:21 AM
FJ40 in Dallas area for sale	r0cky	Early Land Cruisers	1	08-26-2005 10:09 PM
ahriman's rig w/sliders - [PICS]	ahriman	95.5-2004 Tacomas & 96-2002 4Runners	36	07-07-2004 02:10 PM