new rear bumper is on
#1
Contributing Member
Thread Starter
new rear bumper is on
i am looking for one of those flip-up license plate brackets so that my hitch is accessable (the hitch was supposed to be in the middle of the bumper), but it has to be low profile so that the illuminators will shine infront of the plate rather than behind... and yes, those are FORD illuminator lenses from a late model explorer.
Last edited by Brendan; 04-28-2004 at 08:49 PM.
#4
Contributing Member
Very nice Sizzle, that is almost excactly what I am planning. What size tubing is that? Are you saying the back-up lights are from a Ford Explorer and how did you wire them up?
#5
Contributing Member
Thread Starter
Originally Posted by mt_goat
Very nice Sizzle, that is almost excactly what I am planning. What size tubing is that? Are you saying the back-up lights are from a Ford Explorer and how did you wire them up?
#6
Steel
Originally Posted by SizzleChest
not the backups, the small illuminator lenses that are just inside the tow shackles. and it's not tubing, it's channeled steel
The bumper does look nice, whatever you made it out of
Trending Topics
#9
Contributing Member
Join Date: Aug 2002
Location: High Point NC
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by steelhead
Well if I had to guess what was under the cover I would say a Chevrolet Corvette manufactured somewhere in the 80's, am I right?
Also about how much was the materials to make that bumper, frame connections and all, broken down if you would and don't mind sharing. I've been looking into making one just like that for my 85'. I'm curious about the cost, I've never priced steel before.
#10
Contributing Member
Thread Starter
Originally Posted by steelhead
Well if I had to guess what was under the cover I would say a Chevrolet Corvette manufactured somewhere in the 80's, am I right?
1978 L82 4-spd
#11
Contributing Member
Thread Starter
Originally Posted by waskillywabbit
Channel, rectangular tubing, regardless it has a size and a thickness and I think that is what he was looking for. Channel is basically rect. tubing with a side cut-out anyway...:pat:
The bumper does look nice, whatever you made it out of
The bumper does look nice, whatever you made it out of
#12
Steel pricing
Originally Posted by Stump1883
I concur(sp). <---spelling was never my best subject.
Also about how much was the materials to make that bumper, frame connections and all, broken down if you would and don't mind sharing. I've been looking into making one just like that for my 85'. I'm curious about the cost, I've never priced steel before.
Also about how much was the materials to make that bumper, frame connections and all, broken down if you would and don't mind sharing. I've been looking into making one just like that for my 85'. I'm curious about the cost, I've never priced steel before.
Steel prices have gone out of sight in the past 3 months...
#13
The bumper does look good, as does the truck.
I do have a question about those bumper types, and I guess now is as good a time as any to ask. If it is to be used for 'wheeling purposes, without a doubt, this is the place that would get dragged on and hit the most. However, with all the exposed body on the sides, I have a hard time understanding why one would not have that area protected with a wrap-around design. This in no way is meant to offend, or belittle those who have these styled bumpers only on the tail end like yours, but very curious why one would leave all that sheet metal exposed.
I do have a question about those bumper types, and I guess now is as good a time as any to ask. If it is to be used for 'wheeling purposes, without a doubt, this is the place that would get dragged on and hit the most. However, with all the exposed body on the sides, I have a hard time understanding why one would not have that area protected with a wrap-around design. This in no way is meant to offend, or belittle those who have these styled bumpers only on the tail end like yours, but very curious why one would leave all that sheet metal exposed.
#14
Contributing Member
Join Date: May 2002
Location: Wandering around Phoenix
Posts: 6,033
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by Darren
The bumper does look good, as does the truck.
I do have a question about those bumper types, and I guess now is as good a time as any to ask. If it is to be used for 'wheeling purposes, without a doubt, this is the place that would get dragged on and hit the most. However, with all the exposed body on the sides, I have a hard time understanding why one would not have that area protected with a wrap-around design. This in no way is meant to offend, or belittle those who have these styled bumpers only on the tail end like yours, but very curious why one would leave all that sheet metal exposed.
I do have a question about those bumper types, and I guess now is as good a time as any to ask. If it is to be used for 'wheeling purposes, without a doubt, this is the place that would get dragged on and hit the most. However, with all the exposed body on the sides, I have a hard time understanding why one would not have that area protected with a wrap-around design. This in no way is meant to offend, or belittle those who have these styled bumpers only on the tail end like yours, but very curious why one would leave all that sheet metal exposed.
#16
Contributing Member
Originally Posted by waskillywabbit
Steel is around $0.65/lb these days. A stick of 2" x 3" x 3/16" thk tubing 20 ft long and a stick of 1 5/8" OD x 1/8" thk round tubing 20 ft long were right around $100 when I built my sliders.
Steel prices have gone out of sight in the past 3 months...
Steel prices have gone out of sight in the past 3 months...
The price of steel is due to pick up even further as China picks up steam and the US recovers.
Very nice vette by the way.
#17
Contributing Member
Originally Posted by Darren
The bumper does look good, as does the truck.
I do have a question about those bumper types, and I guess now is as good a time as any to ask. If it is to be used for 'wheeling purposes, without a doubt, this is the place that would get dragged on and hit the most. However, with all the exposed body on the sides, I have a hard time understanding why one would not have that area protected with a wrap-around design. This in no way is meant to offend, or belittle those who have these styled bumpers only on the tail end like yours, but very curious why one would leave all that sheet metal exposed.
I do have a question about those bumper types, and I guess now is as good a time as any to ask. If it is to be used for 'wheeling purposes, without a doubt, this is the place that would get dragged on and hit the most. However, with all the exposed body on the sides, I have a hard time understanding why one would not have that area protected with a wrap-around design. This in no way is meant to offend, or belittle those who have these styled bumpers only on the tail end like yours, but very curious why one would leave all that sheet metal exposed.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM