need help installing boost gauge 3.4L 99 tacoma supercharged
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
need help installing boost gauge 3.4L 99 tacoma supercharged
good afternoon everybody,
i have been searching and searching but i cannot figure out the exact line i need to t into for the gauge. i dont want to screw anything up and am being overly cautious i guess.
i bought the truck with the s/c on it so im not familiar with everything coming and going on it.
i have an innovate mdx vacuum boost gauge. want to install it on my 99 taco 3.4
i bought a calibration unit from urd and had to t into the hose going from s/c to regulator on the very back of the s/c. do i have to t into that a second time or am i way off?
any help would be greatly appreciated.
i have been searching and searching but i cannot figure out the exact line i need to t into for the gauge. i dont want to screw anything up and am being overly cautious i guess.
i bought the truck with the s/c on it so im not familiar with everything coming and going on it.
i have an innovate mdx vacuum boost gauge. want to install it on my 99 taco 3.4
i bought a calibration unit from urd and had to t into the hose going from s/c to regulator on the very back of the s/c. do i have to t into that a second time or am i way off?
any help would be greatly appreciated.
#4
Contributing Member
There should be a small nipple on the plenum after the supercharger, you want to T into that. It should be on the back side of the supercharger facing the firewall.
It tells you in the manual which one it is.
It tells you in the manual which one it is.
Thread
Thread Starter
Forum
Replies
Last Post
Seattle_Sign_Guy
95.5-2004 Tacomas & 96-2002 4Runners
0
07-12-2015 12:38 PM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM