Please note that the email server is about 1 to 2 hours behind, so please do not create a second account while waiting for your registration letter to arrive
Welcome to Yotatech!
Welcome to Yotatech,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
need to remove big rubber grommet from stock injector and put on bottom of supra injector before putting supra inj back in right? any one have pic of how the new tubing should look like on the right side of the s/c and engine bay. my install manual for my 98 is not that clear on where to install the t-fitting etc. as the manual is for -96-2k..some pics are of the 99-00 and do not correlate with mine etc. also my s/c i bought did not have the bracket as shown on page nine of the manual that bolts into the top water pump bolt...mine was a pear shaped black bracket with two "fingers" for bolts coming out of it-one short, one longer. is this a different gen s/c?
also can I run the s/c, supra injectors and plugs without installing the new split sec ftc for a couple of days?
thanks alot. jason 949.689.6106
This ad is not displayed to registered members. Register your free account today and become a member on Yotatech!
10-22-2006, 09:09 AM
Similar Threads
