Got my new exhaust system!
12-10-2004, 12:20 PM
#1
Contributing Member
Thread Starter
Join Date: Mar 2003
Location: COTKU,Ontario,Canada
Posts: 11,334
Likes: 0
Received 0 Likes
on
0 Posts
Got my new exhaust system!
I finally got my new exhaust installed a few weeks ago and I thought I'd post a few thoughts and observations...
It is a custom fabricated manifold back system with stainless free flow cat and free flow muffler (I call it the "rumble" muffler, it sounds a bit like a glass pack, that is nice and quiet till I lay on the gas). The piping is all competion roll bar tube mandrel bent and mig welded so the truck should fall apart first
. I really could'nt believe the difference it made to my fuel economy I was averaging 524km to a tank. (dead empty) The first tank only got me 509km but I had a severe case of "happy foot". the second tank got me 543km before i chikened out and put some gas in ( I was about to drive on a strech of road with no place to stop and jerry can 
). The giddy up is much better now too, I know I can get out of the way now. I would have to say if you want more out of the 3.0 look to the exhaust and intake. Cheers Aviator 
It is a custom fabricated manifold back system with stainless free flow cat and free flow muffler (I call it the "rumble" muffler, it sounds a bit like a glass pack, that is nice and quiet till I lay on the gas). The piping is all competion roll bar tube mandrel bent and mig welded so the truck should fall apart first
. I really could'nt believe the difference it made to my fuel economy I was averaging 524km to a tank. (dead empty) The first tank only got me 509km but I had a severe case of "happy foot". the second tank got me 543km before i chikened out and put some gas in ( I was about to drive on a strech of road with no place to stop and jerry can ). The giddy up is much better now too, I know I can get out of the way now. I would have to say if you want more out of the 3.0 look to the exhaust and intake. Cheers Aviator
12-10-2004, 01:59 PM
#3
Contributing Member
Join Date: Jul 2003
Location: Orlando, FL
Posts: 9,076
Likes: 0
Received 0 Likes
on
0 Posts
I'm gettin ready to order a Flowmaster 40 series from Summit Racing, its a 2.25" inlet/outlet and I'm gonna have new 2.25" piping bent up from the cat back. I'm hoping this will help a little bit with power and fuel economy but I'm not sure. I'm debating on whether or not to go with a free-flow cat. I probably won't for now but maybe after christmas I'll have them go back under it and put one on.
What brand cat did you go with?
Fink
What brand cat did you go with?
Fink
12-10-2004, 05:34 PM
#4
Registered User
I'm getting a flowmaster 50 and high flow put on in about a week....I'm super excited about it. I'm hoping to get a little better fuel economey and some pep out of it. Hey fink, trunner sent me to this guy with an ebay shop......he's a good guy and will help you out a ton. I called him and got everything taken care of before it was sent. I got the $56 dollar carsound cat 2.25in/out....I've heard it works well so I'm just waiting for it to come in the mail. I don't think the brand really matters as long as it is high flow.
http://members.ebay.com/ws2/eBayISAP...=jehovah-nissi
http://members.ebay.com/ws2/eBayISAP...=jehovah-nissi
12-11-2004, 07:06 PM
#5
Registered User
Join Date: Oct 2004
Location: Yorktown, VA
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
My brother and law just bought a toyota truck and doesn't want the exhaust system. so i'm putting it on my truck. it's has a Flowmaster 40 series but I'm not sure what type of cat.. The cat looks weird it has a little spout coming off of it? I'm guessing it's smiliar to stock.
Thread
Thread Starter
Forum
Replies
Last Post
39 Thieves
86-95 Trucks & 4Runners (Build-Up Section)
1
01-06-2017 01:08 PM
defrag4
Vehicles - Trailers (Complete)
0
07-31-2015 10:50 AM
