Brembos from eBay?
#1
Contributing Member
Thread Starter
Join Date: Jun 2005
Location: Southern Arizona
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Brembo Rotors from eBay?
Does anyone have experience with Brembos from this ebay retailer?
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WD1V
They are priced right. About $110/pair with about $15 shipping for Brembo drilled & slotted. I am considering slotted-only, however.
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WD1V
They are priced right. About $110/pair with about $15 shipping for Brembo drilled & slotted. I am considering slotted-only, however.
Last edited by iBilinTuc; 07-05-2005 at 05:34 AM. Reason: add key search word
#2
pure crud.... just get some blanks man.. like at www.performancerotors.com or something.
#3
that is a brembo blank rotor that that company machined and drilled in house...... BAD
if Brembo didnt make the actual cuts, then its a stock rotor with material removed and will not hold up well.....
if Brembo didnt make the actual cuts, then its a stock rotor with material removed and will not hold up well.....
#5
Registered User
Originally Posted by kevin444
pure crud.... just get some blanks man.. like at www.performancerotors.com or something.
From their webpage:
We drill and slot all the BLANK BREMBO rotors "in-house" with this CNC Machine. We receive the original blank rotors manufactured by BREMBO and use the CNC Machine to drill and slot these rotors. Please call us 1-818-344-4415 if you have any questions regarding this process.
I don't agree with Jim, as I think Brembo themselves do the same thing. My slotted PerformanceRotors are doing just fine, and I've been beating on them pretty hard the last 4,000 miles.
#6
I Bought drilled brembo rotors from a large seller on ebay and they were fake (not brembo). They were advertised as brembo but were cheap Korean sourced rotors and look low quality. Look on the sellers feedback (I wish I had looked closely). In my case the seller had a 98% positive rating but several people had made comments that the rotors were not genuine (and for some reason they left positive or neutral comments that do not change the positve rating). Easy to check but buyer beware.
#7
Originally Posted by midiwall
Just to be clear, Performance buys Brembo blanks and drills them theirselves.
From their webpage:
I don't agree with Jim, as I think Brembo themselves do the same thing. My slotted PerformanceRotors are doing just fine, and I've been beating on them pretty hard the last 4,000 miles.
From their webpage:
I don't agree with Jim, as I think Brembo themselves do the same thing. My slotted PerformanceRotors are doing just fine, and I've been beating on them pretty hard the last 4,000 miles.
Trending Topics
#8
Originally Posted by Fingers
I Bought drilled brembo rotors from a large seller on ebay and they were fake (not brembo). They were advertised as brembo but were cheap Korean sourced rotors and look low quality. Look on the sellers feedback (I wish I had looked closely). In my case the seller had a 98% positive rating but several people had made comments that the rotors were not genuine (and for some reason they left positive or neutral comments that do not change the positve rating). Easy to check but buyer beware.
i heard of brembo imitation company by the name of bradi!
#9
Registered User
Originally Posted by jimabena74
drilling and slotting a blank will leave less material than jsut a blank..... nothing to disagree about there
if Brembo didnt make the actual cuts, then its a stock rotor with material removed and will not hold up well.....
As well:
that is a brembo blank rotor that that company machined and drilled in house...... BAD
I'm pretty sure that Bembo rotors in general are machined, not cast. So the slots/holes have to get cut into the blanks at some point...
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
The Classifieds GraveYard
34
10-06-2021 03:03 PM
JRB4Runner2015
95.5-2004 Tacomas & 96-2002 4Runners
1
09-20-2015 12:29 AM
dropzone
The Classifieds GraveYard
0
09-13-2015 11:18 AM