4runner_keith

Currently running 33X12.5 15'S recently installed Bj spacers skyjacker shocks and ome springs in rear.. Also cranked T-bars. Would i be able to fit and wheel now? Or what would my next step be???? Body lift?

4runner_keith

i just noticed i didint write the tire size i am looking to switch to.. 35x12.5 15's

Swimmerboy2112

iTrader: (2)

I dont know what you need to fit them but you should buy mine!

camo31_10.50

you could fit them with a 3" body lift and lots of trimming.

or you could buy a cheap used 4"bracket lift and have no problem running them.

snobdds

I have read three threads on the same topic in one day. This topic has been beat to death over and over again. Here read this:

https://www.yotatech.com/forums/f116...-guide-155339/

MaK92-4RnR

whats wrong with 33s? i have 33s on no lift and it looks pretty damn good.

camo31_10.50

lol some people don't like 33's Mak..i have a 4" lift and 33's...and it doesn't look good..tires needa be bigger lol

now i'm going with 35's (in the future) because of the places i go, things i do..35's aren't NEEDED..but 35's..5.29's..3.4L..will be nice maybe even some 36's ..because IROK's are PURE SEX.

4runner_keith

just trying to level the playing field a little bit with the guys who run like 38's and . I was hopeing to figure out how to get 35's to fit, then lockin it up...

AxleIke

Not the same model, but you get the idea. No lift, 35x12.50. Some trimming, not a lot.

Keep it low, and your IFS will like you better.

However, be sure to keep spare steering parts with you.

You don't want this:



Mine is now this for that very reason: