Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS
Sponsored by:
Sponsored by: DashLynx

Top end noise

Thread Tools
 
Search this Thread
 
Old 01-23-2019, 11:57 AM
  #1  
Registered User
Thread Starter
 
Jooosshua's Avatar
 
Join Date: Jan 2019
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Smile Top end noise

I have a 1994 Toyota Pickup with a 22re that has just been completely rebuilt and I have had the rocker arms ground and refinished and also put a newcamshaft in and I am still haveing a tapping sound. I’ve had people tell me just to drive it that it’ll be okay just looking for other opinions. Thanks for any advice!
Old 01-23-2019, 12:01 PM
  #2  
Registered User
Thread Starter
 
Jooosshua's Avatar
 
Join Date: Jan 2019
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Video of the truck

This is the noise
Attached Files
Old 01-23-2019, 01:16 PM
  #3  
Registered User
iTrader: (1)
 
NYHumpinUtah's Avatar
 
Join Date: Dec 2017
Location: Enoch Utah
Posts: 839
Received 75 Likes on 54 Posts
Welcome
How long after the rebuild? Have you adjusted the valves since the rebuild?
How does it run?
Old 01-23-2019, 01:20 PM
  #4  
Registered User
 
87-4runner's Avatar
 
Join Date: Mar 2012
Location: Oklahoma
Posts: 1,139
Received 409 Likes on 263 Posts
What clearance and how did you set the valves cold or hot? New timing chain, gear, and guides?

Last edited by 87-4runner; 01-23-2019 at 01:21 PM.
Old 01-23-2019, 01:39 PM
  #5  
Registered User
iTrader: (2)
 
Robert m's Avatar
 
Join Date: May 2006
Location: Apple Valley, CA
Posts: 1,895
Received 108 Likes on 87 Posts
How tight are the valve cover nuts?
Old 01-23-2019, 03:10 PM
  #6  
Registered User
Thread Starter
 
Jooosshua's Avatar
 
Join Date: Jan 2019
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
I just put the cam and rocker arms back in yesterday and adjusted them cold to .007 and .011 all the nuts were tight and looked fine
Old 01-23-2019, 03:12 PM
  #7  
Registered User
Thread Starter
 
Jooosshua's Avatar
 
Join Date: Jan 2019
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
I loosened the valve cover nuts earlier to see if it would change but it had no effect on the noise, everything in the motor is new it was just rebuilt last July with new head cam and rocker arm assembly. But what I thought was weird is the motor in it before this one made the same noise but that was a completely different motor
Old 01-23-2019, 03:12 PM
  #8  
Registered User
Thread Starter
 
Jooosshua's Avatar
 
Join Date: Jan 2019
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Truck runs absolutely perfect too. No problems with how it runs
Old 01-23-2019, 03:57 PM
  #9  
Registered User
 
ev13wt's Avatar
 
Join Date: Oct 2018
Posts: 602
Received 117 Likes on 88 Posts
Originally Posted by Jooosshua
... But what I thought was weird is the motor in it before this one made the same noise but that was a completely different motor
I know that feeling.

On some days it will run perfect I promisr, but on most it ˟˟˟˟s with you.

Tick tick tick...
Old 01-23-2019, 04:17 PM
  #10  
Registered User
 
snippits's Avatar
 
Join Date: Aug 2018
Posts: 579
Received 134 Likes on 114 Posts
It's normal. Mine sounds exactly like that with new cam, and valves adjusted cold 7/11. Valves adjusted to 8/12 cold when I first got it back together are just a tad louder than the 7/11 I am running now. Not going any tighter.

Only cleaned the old rocker assembly. Maybe a new rocker assembly might quieten it down some. Mine runs just fine as it is. Tappy is Happy.
Old 01-23-2019, 04:22 PM
  #11  
Registered User
 
Paul22RE's Avatar
 
Join Date: Feb 2018
Location: NNJ
Posts: 603
Received 158 Likes on 101 Posts
Originally Posted by snippits
Tappy is Happy.
Agreed.
Old 01-24-2019, 01:32 AM
  #12  
Registered User
 
ev13wt's Avatar
 
Join Date: Oct 2018
Posts: 602
Received 117 Likes on 88 Posts
Sometimes it's actrually silent. This is OEM with 3K miles or so:



Today, it's tappin away.
Old 01-24-2019, 03:50 AM
  #13  
Registered User
 
Melrose 4r's Avatar
 
Join Date: Jun 2017
Location: 02176
Posts: 2,247
Received 833 Likes on 558 Posts
Im gonna say just try your valve adjustment once again hot at 7/11(not in the parking lot, though!)
Its most likely the exhaust valves. Being .001” off on .011” is going to sound worse than .001” off on .007”.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bcurtis90
Newbie Tech Section
4
10-03-2013 10:47 PM
87 4x4
86-95 Trucks & 4Runners
15
01-10-2011 08:49 PM
JollyGreen
86-95 Trucks & 4Runners
13
07-04-2010 10:28 AM
JohnStra
86-95 Trucks & 4Runners
8
01-27-2007 02:58 PM
Nyqill Junkie
86-95 Trucks & 4Runners
6
05-02-2006 05:06 PM



Quick Reply: Top end noise



All times are GMT -8. The time now is 09:31 PM.