eightnine

Hello everyone, iv been having some issues with my front susopension lately. Im getting a wierd rattle / chinging sound coming from the front suspension both Left and right sides. It's a wierd rattle, kind of sounds like a glass cup full of screws flopping around. I hear it over every single little bump. When I locked the hubs, but still in 2wd, the noise went away completely. Once they are unlocked they start to make the noise again. I know for a fact that both CV boots are torn and the inside of the tires are warn down. There is also vibrations accompanied by the rattling from 10-25mph My truck drives straight BTW. I can also hear the sound by kicking the tire when the truck is stopped. I also tried to find play in the wheel but nothing its very firm so i doubt its a wheel bearing. Any advice would be appreciated, thanks

This ad is not displayed to registered members. Register your free account today and become a member on Yotatech!

__________________
1989 Toyota 4runner Special Edition
- Rebuilt 22re bored .20 over 4.30 gears, - Magnaflow Performance Exhaust with Magnaflow Hi Flow Catalytic Converter, Monroe Sensa-Tracs Shocks all around, 4runner AALs, Custom Checkerplate front skid plate, Kayline Soft Top , Clear Corners and Turn Signals, Eagle Alloy Rims with 31x10.5x15 M/T tires, 2 12" JBL Subwoofers / MTX AMP, Pioneer Premiere Speakers, JVC KD-G730 MP3/CD/Bluetooth

mr toytech

if it is still ifs, try seeing if the axles have any play in the hub. grab the axle and see if there is any movement in the spindle. if there is you either need new spindle bushings or they need a good lubing.

__________________
my truck new
my truck now with TRD wheels and exhaust
93 toyota
3.0 manual trans.

jeeps are so cute even barbie has one!!!

bigarms23

either way ifs or sa it sounds like you have a broken hub

__________________
1988sr5 4.3v6 4runner with chevy axles 513 gears dual cases overall 300to1 ratio 36mtzs 5inch lift detroits

1972 stepside jimmy d44/d70 425hp

1995 green range rover

eightnine

took apart the hub for the first time with josh aka 4runnerguy and found that the hub had no grease left inside. Stuffed it full of grease and no more rattle. thanks for the tips guys

__________________
1989 Toyota 4runner Special Edition
- Rebuilt 22re bored .20 over 4.30 gears, - Magnaflow Performance Exhaust with Magnaflow Hi Flow Catalytic Converter, Monroe Sensa-Tracs Shocks all around, 4runner AALs, Custom Checkerplate front skid plate, Kayline Soft Top , Clear Corners and Turn Signals, Eagle Alloy Rims with 31x10.5x15 M/T tires, 2 12" JBL Subwoofers / MTX AMP, Pioneer Premiere Speakers, JVC KD-G730 MP3/CD/Bluetooth