Low inital idle 3vze
#1
Low inital idle 3vze
Have another thread talking about an ongoing hard start issue that I am still working on. Just wanted to post a video of a secondary possibly related issue I am having. You'll see a low, building idle in the video that corrects itself slowly, or quickly if I hit the gas after she fires. This happens mostly on warm starts after sitting any period of time more than a few minutes. Occasionally happens on cold starts. Wondering if anyone else has dealt with and fixed this.
No CEL. Checked timing, plugs, wires, coil, distributor cap, afm, tps, compression, valve timing, new coolant temp sensor, no vacuum leaks, no smoke. After the initial idle she runs like a top. Pulls harder than any other 3.0 I've been in.
I don't touch the throttle until the very end when it revs above 1000.
No CEL. Checked timing, plugs, wires, coil, distributor cap, afm, tps, compression, valve timing, new coolant temp sensor, no vacuum leaks, no smoke. After the initial idle she runs like a top. Pulls harder than any other 3.0 I've been in.
I don't touch the throttle until the very end when it revs above 1000.
Last edited by brycetryce; 08-05-2018 at 06:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
snacks
95.5-2004 Tacomas & 96-2002 4Runners
16
02-21-2011 04:46 AM
mike_d
95.5-2004 Tacomas & 96-2002 4Runners
11
11-14-2003 06:50 AM