Finishing head gasket job, missing fuel hose from plenum
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Anchorage AK
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Finishing head gasket job, missing fuel hose from plenum
I am in the final stages of getting my head gasket job done, I seem to have misplaced the fuel line from the pressure regulator return on the plenum.
Specifically I need to find the hose that connects from the plenum to ?
Any pics or help would be appreciated.
Specifically I need to find the hose that connects from the plenum to ?
Any pics or help would be appreciated.
#3
Registered User
Thread Starter
Join Date: Jan 2007
Location: Anchorage AK
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I guess I need to be more specific. It is the return hose from the pressure regulator that comes out above the right head. It is attached to the plenum, the outlet sits towards the firewall near the vacume line for the power brake booster. I'm assuming the line that attaches to it is somewhere on the firewall but I can't find it. Ill post some pics when I get home.
#4
Registered User
#6
Registered User
Thread Starter
Join Date: Jan 2007
Location: Anchorage AK
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for not posting back earlier, the pics from both the latter two posts were what I needed. The runner started up, I need to adjust the timing a bit but I think things are coming together.
Thanks for all the help.
Thanks for all the help.
Thread
Thread Starter
Forum
Replies
Last Post
TURBOrunnerNM
86-95 Trucks & 4Runners
4
07-22-2015 11:01 AM