Blower motor
10-02-2011, 02:45 PM
#1
Registered User
Thread Starter
Join Date: Mar 2011
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Blower motor
Hey guys Just wanted to share some info I got on blower motors for our trucks. I needed to replace my broken one and checked them out on rockauto.com. I noticed that the fans cross listed with a few other cars and decided to save a few bucks by snagging one from the local pick-n-pull. The cars I was looking for were (Ford probe 89-92, Geo Tracker 89-94, Mazda 323 86-89, Mazda 626 90-92, Mazda b pickups 87-93, Mazda MX6 91-92, and the Mazda Rx7 86-90)
Of course I was looking for a 1st gen 4runner or toyota pickup but they didn't have any. I got lucky and found a Mazda b2200 truck with the dash already pull. So I popped the motor out, tested it with the drill batt and took it back to my 85 runner. Didn't even have to change out the hampster fan, its was 100% plug and play. Now my runner is ready for winter with heat and defrost, I'm happy.
Stay warm this winter
Of course I was looking for a 1st gen 4runner or toyota pickup but they didn't have any. I got lucky and found a Mazda b2200 truck with the dash already pull. So I popped the motor out, tested it with the drill batt and took it back to my 85 runner. Didn't even have to change out the hampster fan, its was 100% plug and play. Now my runner is ready for winter with heat and defrost, I'm happy.
Stay warm this winter
10-02-2011, 03:16 PM
#2
Sounds like a good find at the yard.
Usually just worn out brushes in those blower motors, pretty easy to fix:
- http://www.4crawler.com/4x4/CheapTri...ml#MotorRepair
Usually just worn out brushes in those blower motors, pretty easy to fix:
- http://www.4crawler.com/4x4/CheapTri...ml#MotorRepair
Thread
Thread Starter
Forum
Replies
Last Post
