Notices
Misc Stuff (Vehicle Related) Interior, exterior, audio, anything that does not fit into the above categories

FS[MidAtl]: 1979-1983 Pickup Parts For Sale - Post Build Garage Clean Out

Thread Tools
 
Search this Thread
 
Old Jun 11, 2015 | 10:19 AM
  #1  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Exclamation 1979-1983 Pickup Parts For Sale - Post Build Garage Clean Out

I have recently wrapped up the restoration on my 1983 Toyota Pickup so it is garage sale time. In case you have not followed my build thread, I'm the kind of guy that likes to have nice new shiny parts on my truck so I have a lot of left over parts that are perfectly good and functional but don't quite up to my appearance standards. There are also several parts that I simply didn't need any more after upgrades. I WILL NOT SELL YOU WORTHLESS JUNK - All parts were functioning properly when removed, but most are just simply dirty and could be easily cleaned up with some degreaser and elbow grease, maybe a little paint. Any damaged parts will be disclosed in the descriptions below. Most parts are for a 1983 4WD Pickup, but I have also listed other years that I believe are compatible - the buyer will be responsible for confirming fitment. I know first hand how rare and unavailable some of these parts are so I have all the prices posted at what I feel is fair, but I will entertain reasonable offers - I'm not the one that needs parts here and it isn't absolutely necessary to sell them so please do not waste my time with ridiculous low ball offers. I will also entertain trades for parts that I need listed on the following thread:
https://www.yotatech.com/forums/f109...wanted-288614/

I will accept payment via PayPal and Shipping will be on your dime, but most parts will fit in a USPS flat rate box. Parts are located in 21804.

Feel free to reply to this thread or PM me with questions. Thanks for looking!

*EGR Cooler/Crossover - $15 - located on the back of the head (Fits 1979-1983 Pickups)
*Water Bypass Pipe - $10 - located on the back on the timing cover on the driver side (Fits 1979-1983 Pickups)
*Thermostatic Vacuum Switching Valve (TVSV) - $15 - located in the on the passenger side of the head between the middle two intake manifold ports (Fits 1981-1983 Pickups)
*Emissions computer - pictured, but no longer available
Name:  1D42840E-3E40-4D7F-B9B4-6ACA71DF3DEB_zps8ovzvqt0.jpg
Views: 468
Size:  1.27 MB

*Blower motor fan control switch - $10 (Fits 1979-1981 Pickups with the vertical blower motor switch on the heater controls)
Name:  0B8F268E-9878-4ACA-B3CB-045EF8958C94_zpsy1mzfioh.jpg
Views: 387
Size:  1.21 MB

*Mechanical fuel pump - $15 (Fits 1979-1983 Pickups)
Name:  3C6A663B-DEC1-49B6-9F5B-1E70E47F96B2_zpsoa5w4s2u.jpg
Views: 410
Size:  1.50 MB

*Factory clutch master cylinder - $10 - no leaks (Fits 1979-1983 Pickups)
Name:  8E425140-8059-42A0-B659-435FB9654E67_zpsqcbdxlpa.jpg
Views: 419
Size:  1.51 MB

*Factory camshaft - $30 - 132,XXX miles, excellent condition, not abnormal wear, no scarring, no pitting, within factory runout and clearance specs (Fits 1981-1983 Pickups with 22R - not sure about the 20R)
Name:  ECD67F0E-C5D1-4616-9F18-C884D45FBC4D_zpssil2krx9.jpg
Views: 386
Size:  1.38 MB


*Factory steering tie rod - $25 - Tie rod ends are still good (Fits 1979-1983 4WD Pickups)
Name:  5F0FDCB6-4724-493D-8502-D57E5F55E06D_zpsi4tnq4ec.jpg
Views: 388
Size:  1.37 MB


*Factory brake master cylinder - $15 - No leaks (Fits 1979-1983 Pickups)
Name:  BEC701F9-089C-415D-A623-EFBEE5C127F0_zpsgit5xbdw.jpg
Views: 449
Size:  1.60 MB



ITEMS SOLD (no longer available):
*Factory SR5 lower gauge pod - $35
*Factory dash defrost vents - $10
*Factory battery tie down and J-bolt - $15
*Factory gas pedal - $15
*Emissions computer - $15
*Aftermarket front bumper stays - $50
*Aftermarket passenger front bumper turn signal - $30
*Factory visors - $30
*Factory defrost ducts - $20
*Aftermarket corner lenses - $10
*Aftermarket headlight doors - $45 (x2)
*Factory Charcoal canisters - $35
*Factory tag lamps - $30
*Factory door handles - $15
*Aftermarket tail light lenses with chrome trim - $80
*Aftermarket side mirrors - $20
*Factory bucket seats - $165
*Factory Fuel sending unit - $65
*Factory cab louvers/vents - $30
*Factory Rear drum brakes - $60
*Factory Front driveshaft - $50
*Factory hood latch - $15
*Dual row timing chain kit - $60
*Factory cold mixture heater (CMH) - $15
*Factory fuel filler hose - $20
*4WD Fender Emblems - $20
*Factory radiator with cap - $50
*Aftermarket Steering stabilizer - $40
*Factory Ashtray - $15

All items are also selling on eBay - get on them while they are still available!

Last edited by kawazx636; Mar 7, 2016 at 05:50 AM. Reason: Removing sold items
Reply
Old Jun 13, 2015 | 06:51 PM
  #2  
2000PRE's Avatar
Registered User
iTrader: (1)
 
Joined: Nov 2012
Posts: 11
Likes: 0
I'll take the emissions computer and gas pedal. Let me know the total with shipping to 77461, and I will PayPal the funds. Thanks!
Reply
Old Jun 14, 2015 | 10:05 AM
  #3  
2manytables's Avatar
Registered User
iTrader: (1)
 
Joined: Jan 2015
Posts: 37
Likes: 0
From: Kansas City, MO
I would be interested in the gauge pod, battery hold down, and the clean defrost vent,
THANKS,
Brad
64075
Reply
Old Jun 15, 2015 | 05:58 AM
  #4  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Originally Posted by 2000PRE
I'll take the emissions computer and gas pedal. Let me know the total with shipping to 77461, and I will PayPal the funds. Thanks!
$15 for the Computer
$15 for the Pedal
$6 for USPS Flat Rate Shipping
-----------------------------
$36 Total

My PayPal address is dave.m.church@gmail.com. Be sure to send me your correct shipping address.

Everything is considered for Sale until funds are received.
Reply
Old Jun 15, 2015 | 05:58 AM
  #5  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Originally Posted by 2manytables
I would be interested in the gauge pod, battery hold down, and the clean defrost vent,
THANKS,
Brad
64075
$35 - Gauge Pod
$15 - Battery Tie Down
$10 - Defrost Vent (I'll throw in the broken one too)
$6 - for USPS Flat Rate Shipping
-----------------------------
$66 Total

My PayPal address is dave.m.church@gmail.com. Be sure to send me your correct shipping address.

Everything is considered for Sale until funds are received.
Reply
Old Jun 15, 2015 | 07:26 AM
  #6  
2manytables's Avatar
Registered User
iTrader: (1)
 
Joined: Jan 2015
Posts: 37
Likes: 0
From: Kansas City, MO
Just sent the money via PayPal.
Thanks
brad
Reply
Old Jun 15, 2015 | 07:51 AM
  #7  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Originally Posted by 2manytables
Just sent the money via PayPal.
Thanks
brad
Thanks, payment received! Please private message me with your shipping address and I'll get the parts packed up and shipped out tomorrow.

SR5 gauge pod, battery tie down and defrost vents have been removed from the parts listing.
Reply
Old Jun 15, 2015 | 10:37 AM
  #8  
wolfpackfan33's Avatar
Registered User
iTrader: (1)
 
Joined: Mar 2014
Posts: 37
Likes: 0
Accelerator Pad

I sent a PM earlier in the week. I want the accelerator pad. Shipped to 27252
Reply
Old Jun 15, 2015 | 07:57 PM
  #9  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Originally Posted by wolfpackfan33
I sent a PM earlier in the week. I want the accelerator pad. Shipped to 27252
$15 for the Pedal
$6 for USPS Flat Rate Shipping
-----------------------------
$21 Total

My PayPal address is dave.m.church@gmail.com. Be sure to send me your correct shipping address.

Everything is considered for Sale until funds are received.
Reply
Old Jun 16, 2015 | 02:05 AM
  #10  
wolfpackfan33's Avatar
Registered User
iTrader: (1)
 
Joined: Mar 2014
Posts: 37
Likes: 0
I sent payment via PayPal. I included my address on the PayPal payment.
Reply
Old Jun 16, 2015 | 05:07 AM
  #11  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Originally Posted by wolfpackfan33
I sent payment via PayPal. I included my address on the PayPal payment.

Got it! Gas pedal has been taken off the list. I'm hoping to get it shipped out today. Thanks!
Reply
Old Jun 18, 2015 | 08:08 AM
  #12  
Heritage's Avatar
Registered User
iTrader: (1)
 
Joined: May 2007
Posts: 8
Likes: 0
Dave,

I'm interested in the Aftermarket front bumper stays......please provide total to ship to VA Beach, VA (zip 23457).
note: message also sent to e-mail address
THANKS
Reply
Old Jun 18, 2015 | 02:55 PM
  #13  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Originally Posted by Heritage
Dave,

I'm interested in the Aftermarket front bumper stays......please provide total to ship to VA Beach, VA (zip 23457).
note: message also sent to e-mail address
THANKS
I should be able to squeeze them in the medium flat rate box, so it'll be $11 for shipping.
Reply
Old Jun 19, 2015 | 03:06 AM
  #14  
Heritage's Avatar
Registered User
iTrader: (1)
 
Joined: May 2007
Posts: 8
Likes: 0
Dave,

I just sent payment, via PayPal, for the Bumper Stays....

THANKS Again!!
Reply
Old Jun 19, 2015 | 09:12 PM
  #15  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Originally Posted by Heritage
Dave,

I just sent payment, via PayPal, for the Bumper Stays....

THANKS Again!!
I got the payment. I'll get them boxed up tomorrow and possibly shipped. Worst case scenario they'll go out monday morning
Reply
Old Jul 1, 2015 | 08:36 AM
  #16  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
All the parts sold so far have been shipped and should have arrived already - let me know if you guys have any issues.

Lots of parts still left for those who are interested.
Reply
Old Jul 2, 2015 | 05:22 AM
  #17  
Heritage's Avatar
Registered User
iTrader: (1)
 
Joined: May 2007
Posts: 8
Likes: 0
Yep....I received the bumper stays last week and I appreciate the care in packaging.... I wouldn't hesitate to buy any parts from Dave.

Thanks Again :-)
Reply
Old Jul 6, 2015 | 08:48 AM
  #18  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Bump, lots of parts still available!
Reply
Old Jul 7, 2015 | 03:09 PM
  #19  
eric808's Avatar
Registered User
iTrader: (1)
 
Joined: Oct 2011
Posts: 2
Likes: 0
From: Ewa Beach
Hey man im interested in the headlight doors, visors and front pass turn signal. Can I get a total for zip code 96797.
Thanks- Eric
Reply
Old Jul 7, 2015 | 09:50 PM
  #20  
kawazx636's Avatar
Thread Starter
Super Moderator
iTrader: (3)
 
Joined: Jan 2012
Posts: 3,218
Likes: 26
From: Salisbury, MD
Originally Posted by eric808
Hey man im interested in the headlight doors, visors and front pass turn signal. Can I get a total for zip code 96797.
Thanks- Eric
Man... Oahu?! I just did a rough calculation on USPS and they are qouting it out at around $72 for shipping. I can try to see what I come up with on some flat rate boxes, but they would likely come in at least a couple different packages. I'll stop by the post office tomorrow to see what will fit in the flat rate boxes.

My buddy has a house in Holawa right on Sunset Beach - I typically go down there every fall to hang out with him and do some surfing. I would deliver personally, but with two kids now I doubt I'll be going anytime soon. Plus surfing 15ft swell isn't in the best interest of my family either.

I'll get back with you shortly on more accurate and hopefully affordable shipping costs.
Reply



All times are GMT -8. The time now is 12:28 AM.