YotaTech Forums
The center cap before....
The center cap before....
0 2017/02/22 13:33:07
Without taking the wheel apart and probably ruining the rubber, I will hand sand the metal and por15.
Without taking the wheel apart and probably ruining the rubber, I will hand sand the metal and por15.
0 2017/02/22 13:29:46
0 2017/02/22 13:28:37
The wires themselves are a little crunchy so I will rewire them.
The wires themselves are a little crunchy so I will rewire them.
0 2017/02/22 13:27:33
Luckily all the plastic is in reasonable condition.
Luckily all the plastic is in reasonable condition.
0 2017/02/22 13:24:46
I picked this wheel up about 7 years ago to use for my 81 but never got it done.
I picked this wheel up about 7 years ago to use for my 81 but never got it done.
0 2017/02/22 13:23:50
0 2017/02/22 10:33:36
0 2017/02/22 10:32:46
0 2017/02/22 10:32:01
0 2017/02/22 10:25:36
0 2017/02/22 10:24:33
0 2017/02/22 10:23:30
0 2017/02/22 10:21:59
0 2017/02/21 13:32:34
0 2017/02/21 13:31:49
0 2017/02/21 13:30:59
My first IFS 86. Needed a DD while we were working on the 85
My first IFS 86. Needed a DD while we were working on the 85
0 2017/02/20 14:19:49
My 85 after we recovered it from the theirs. This took a couple years to do.
My 85 after we recovered it from the theirs. This took a couple years to do.
0 2017/02/20 14:19:34
My 85 before it was stolen
My 85 before it was stolen
0 2017/02/20 14:19:17
My 88 2wd
My 88 2wd
0 2017/02/20 14:19:01
0 2017/02/20 14:14:34
0 2017/02/20 14:14:11
It was installed previously with door and window caulk for gaskets
It was installed previously with door and window caulk for gaskets
0 2017/02/19 15:05:22
Also replaced the carb plates with LCE. No vac leaks any longer
Also replaced the carb plates with LCE. No vac leaks any longer
0 2017/02/19 15:04:52
Here's a shot thru the pigeon hole on the drivers side. PO used some galvanized pipe to shore up the front of the bed floor
Here's a shot thru the pigeon hole on the drivers side. PO used some galvanized pipe to shore up the front of the bed floor
0 2017/02/19 15:04:19
The missing gusset
The missing gusset
0 2017/02/19 15:04:02
0 2017/02/19 15:03:41
Right rear was gravy taking the bed bolt off
Right rear was gravy taking the bed bolt off
0 2017/02/19 15:03:20
0 2017/02/01 11:52:13
0 2017/02/01 11:51:49
0 2017/02/01 11:51:19
0 2017/02/01 11:39:03
0 2017/02/01 11:30:00
0 2017/02/01 11:29:36
Daystars are a good product
Daystars are a good product
0 2017/01/28 14:05:45
Also dug out the bushing kit and came across an extra transport and tow hook for the truck. I'm gonna install the two piece door windows in it rather than the single glass. Why auto manufacturers ever did away with the wing windows is a mystery to me. Tony
Also dug out the bushing kit and came across an extra transport and tow hook for the truck. I'm gonna install the two piece door windows in it rather than the single glass. Why auto manufacturers ever did away with the wing windows is a mystery to me. Tony
0 2017/01/27 18:34:15
0 2017/01/27 18:33:15
0 2017/01/26 22:06:11
0 2017/01/26 22:05:12
0 2017/01/26 22:04:05