YotaTech Forums
0 2017/03/02 13:19:21
0 2017/03/02 13:18:45
0 2017/03/02 12:10:23
0 2017/03/02 12:09:53
An old clothesline reel was my weapon of choice for bending the brake lines. Worked perfectly!
An old clothesline reel was my weapon of choice for bending the brake lines. Worked perfectly!
0 2017/03/01 14:08:24
0 2017/02/28 15:46:07
0 2017/02/28 15:45:43
0 2017/02/28 15:45:19
0 2017/02/28 15:41:21
0 2017/02/28 15:40:20
0 2017/02/28 15:39:19
0 2017/02/27 18:47:02
0 2017/02/27 18:46:45
0 2017/02/27 18:46:20
0 2017/02/27 18:46:01
0 2017/02/27 18:45:50
0 2017/02/27 18:45:28
0 2017/02/27 18:45:04
0 2017/02/27 18:44:36
0 2017/02/27 18:44:22
This is what was left of the failed brake line. It rusted so badly it was the diameter of a pencil lead.
This is what was left of the failed brake line. It rusted so badly it was the diameter of a pencil lead.
0 2017/02/27 18:43:47
The cross members are surprisingly in relatively good shape. I won't have to use the spares I have.
The cross members are surprisingly in relatively good shape. I won't have to use the spares I have.
0 2017/02/27 18:43:02
0 2017/02/27 18:42:27
0 2017/02/27 18:41:49
I think I may run a flat bed while I'm doing the metal work on the bed.
I think I may run a flat bed while I'm doing the metal work on the bed.
0 2017/02/27 18:39:59
I think when the clay is scraped off there may only be some light rust.
I think when the clay is scraped off there may only be some light rust.
0 2017/02/27 18:39:28
0 2017/02/27 18:38:51
The brake line inside the rail was brittle. I'm glad the po used this as a farm rig and not for the street.
The brake line inside the rail was brittle. I'm glad the po used this as a farm rig and not for the street.
0 2017/02/27 18:38:11
0 2017/02/25 15:48:33
0 2017/02/25 15:48:18
0 2017/02/24 17:39:35
0 2017/02/24 14:34:20
0 2017/02/23 15:16:04
0 2017/02/23 11:24:45
0 2017/02/23 11:24:06
0 2017/02/22 14:22:06
Better than new. Well, almost.
Better than new. Well, almost.
0 2017/02/22 14:21:47
0 2017/02/22 14:21:29
And after. I was thinking about taking some 1500 grit sandpaper to the horn buttons to get a cleaner finish but then I would lose the horn logo as it is not raised and I wouldn't be able to recreate the graphic. Still undecided.
And after. I was thinking about taking some 1500 grit sandpaper to the horn buttons to get a cleaner finish but then I would lose the horn logo as it is not raised and I wouldn't be able to recreate the graphic. Still undecided.
0 2017/02/22 13:34:32
0 2017/02/22 13:34:02