YotaTech Forums
0 2026/02/17 08:36:51
M20 X 1.5 to 6AN adapter.
M20 X 1.5 to 6AN adapter.
0 2026/02/17 08:36:42
This shows the excellent clearance of the 2UZ manifolds. the 1UZ's were heavily pressing on the steering shaft without the engine even seated all the way.
This shows the excellent clearance of the 2UZ manifolds. the 1UZ's were heavily pressing on the steering shaft without the engine even seated all the way.
0 2026/02/17 08:24:56
0 2026/02/17 08:24:46
0 2026/02/17 08:24:37
Driver side. You can see where I cut the manifold here to be able to clock it away from the frame. Trimming of the heat shield by the O2 sensor required.
Driver side. You can see where I cut the manifold here to be able to clock it away from the frame. Trimming of the heat shield by the O2 sensor required.
0 2026/02/17 08:23:53
I clocked the 2.25" side of the adapter to one side when tacking it to the flex joint to provide an angle that pointed away from the frame and fuel lines
I clocked the 2.25" side of the adapter to one side when tacking it to the flex joint to provide an angle that pointed away from the frame and fuel lines
0 2026/02/17 08:22:05
Ended up trimming the adapter a lot to save on length
Ended up trimming the adapter a lot to save on length
0 2026/02/17 08:21:32
0 2026/02/17 08:20:26
0 2026/02/17 08:20:23
0 2026/02/17 08:20:21
0 2026/02/17 08:20:18
0 2026/02/17 08:01:32
0 2026/02/17 08:01:24
0 2026/02/17 08:01:10
0 2026/02/17 08:00:34
0 2026/02/17 08:00:25
0 2026/02/17 08:00:11
transfer case location
transfer case location
0 2026/01/15 07:52:24
trans shift linkage short
trans shift linkage short
0 2026/01/15 07:52:14
underside of stock shifter boot location
underside of stock shifter boot location
0 2026/01/15 07:51:59
trans mount
trans mount
0 2026/01/15 07:51:43
blue tape on floor is where the shifter mount is lining up currently
blue tape on floor is where the shifter mount is lining up currently
0 2026/01/15 07:38:45
0 2026/01/15 07:32:27
driver side to firewall/master cylinder.
driver side to firewall/master cylinder.
0 2026/01/15 07:31:18
passenger side to firewall
passenger side to firewall
0 2026/01/15 07:30:55
I'm not sure yet what I will do about this....maybe 2UZ tundra headers? Maybe some grinding of the mounts will help it not contact the shaft?
I'm not sure yet what I will do about this....maybe 2UZ tundra headers? Maybe some grinding of the mounts will help it not contact the shaft?
0 2026/01/15 07:29:25
driver side is going to be tricky
driver side is going to be tricky
0 2026/01/15 07:29:15
passenger side has plenty of space
passenger side has plenty of space
0 2026/01/15 07:29:05
0 2026/01/15 07:28:56
No polarity here for the brown and yellow. AT oil temp sensor
No polarity here for the brown and yellow. AT oil temp sensor
0 2026/01/12 17:39:40
Oil temp sensor side with the NSSU.
Oil temp sensor side with the NSSU.
0 2026/01/12 17:39:07
1UZ-FE solenoid connector on left, A343F black 3-pin connector on right.
1UZ-FE solenoid connector on left, A343F black 3-pin connector on right.
0 2026/01/12 17:37:12
Black connector is the solenoid connector and the VSS is the gray connector
Black connector is the solenoid connector and the VSS is the gray connector
0 2026/01/12 17:36:19
Pin 1 is Red = Ground "E1". Pin 2 Red/Light blue = S2. Pin 3 Red/Yellow = S1
Pin 1 is Red = Ground "E1". Pin 2 Red/Light blue = S2. Pin 3 Red/Yellow = S1
0 2026/01/12 16:52:55
0 2026/01/12 16:52:38
A343F 3-pin solenoid connector at trans side
A343F 3-pin solenoid connector at trans side
0 2026/01/12 16:51:33
0 2026/01/05 09:36:53
0 2026/01/05 09:36:22
0 2026/01/05 09:30:21