YotaTech Forums
My six finished brackets
My six finished brackets
0 2012/01/26 20:31:56
These are the tools I used
These are the tools I used
0 2012/01/24 21:39:00
Camper shell quick clamp cut and ready to go.
Camper shell quick clamp cut and ready to go.
0 2012/01/24 21:39:00
Back side of angle. Excuse the extra holes and the extra LONG cut. My original plan didn't work so I had to modify. If I were to make another set they would look much neater I promise :)
Back side of angle. Excuse the extra holes and the extra LONG cut. My original plan didn't work so I had to modify. If I were to make another set they would look much neater I promise :)
0 2012/01/24 21:39:00
Dzus fasteners riveted to the angle.
Dzus fasteners riveted to the angle.
0 2012/01/24 21:35:57
36" x 1 1/2" x 1/8" Aluminum angle. I drilled the holes (poorly) myself.
36" x 1 1/2" x 1/8" Aluminum angle. I drilled the holes (poorly) myself.
0 2012/01/24 21:35:57
Dzus fastener and lock spring
Dzus fastener and lock spring
0 2012/01/24 21:35:57
Finito!!
Finito!!
0 2012/02/12 01:13:32
You can see the crossmember support rod if you're looking for it
You can see the crossmember support rod if you're looking for it
0 2012/02/12 01:13:32
After the install
After the install
0 2012/02/12 01:12:36
After the install
After the install
0 2012/02/12 01:12:36
The front view! Sharp!
The front view! Sharp!
0 2012/02/12 01:12:36
All tightened down
All tightened down
0 2012/02/12 01:11:26
Had to cut a little slot or holes in some places
Had to cut a little slot or holes in some places
0 2012/02/12 01:11:26
Zip tie mesh to grill
Zip tie mesh to grill
0 2012/02/12 01:11:26
Make sure to put the screw in a place that wont interfere with the headlight door
Make sure to put the screw in a place that wont interfere with the headlight door
0 2012/02/12 01:09:35
Fastened ends with self tapping screws
Fastened ends with self tapping screws
0 2012/02/12 01:09:35
A view from the back with grill insert set in
A view from the back with grill insert set in
0 2012/02/12 01:09:35
All cut and fitted
All cut and fitted
0 2012/02/12 01:08:05
Bent ends in order to fasten
Bent ends in order to fasten
0 2012/02/12 01:08:05
Once welded in, clean it up the lines
Once welded in, clean it up the lines
0 2012/02/12 01:08:05
A view from the back of the weld ... before this side got welded
A view from the back of the weld ... before this side got welded
0 2012/02/12 01:05:36
"Weld" in missing plastic half-moon
"Weld" in missing plastic half-moon
0 2012/02/12 01:05:36
Cut out the stock center
Cut out the stock center
0 2012/02/12 01:05:36
TOP: 8" x 48" Gutter Guard LEFT: Hacksaw blade MID: Old grille w/ middle cut out BOT: Pieces removed from grille
TOP: 8" x 48" Gutter Guard LEFT: Hacksaw blade MID: Old grille w/ middle cut out BOT: Pieces removed from grille
0 2011/12/08 16:11:13
view from driver's side fender of 'pigtail'. It just hooks up to your engine harness like the actual sensor would.
view from driver's side fender of 'pigtail'. It just hooks up to your engine harness like the actual sensor would.
0 2011/12/06 16:30:00
Top view of fix. Knock sensor to the left as you're looking at it.
Top view of fix. Knock sensor to the left as you're looking at it.
0 2011/12/06 16:28:12
View from front of truck. Looking at nut that's screwed onto the sensor
View from front of truck. Looking at nut that's screwed onto the sensor
0 2011/12/06 16:28:12
view from right side of truck
view from right side of truck
0 2011/12/06 16:28:12
IMG 1564
IMG 1564
0 2011/12/06 16:14:23
IMG 1563
IMG 1563
0 2011/12/06 16:13:50
IMG 1561
IMG 1561
0 2011/12/06 16:13:50
IMG 1559
IMG 1559
0 2011/12/06 16:13:50
IMG 1558
IMG 1558
0 2011/12/06 16:13:06
IMG 1556
IMG 1556
0 2011/12/06 16:13:06
IMG 1557
IMG 1557
0 2011/12/06 16:13:06