gsp4life's Photos

View Profile

Blurry photo, but that's the guide at the bottom there. My guess is the tensioner was put on too tight or just failed early (40k mi). I'll know soon enough.

Blurry photo, but that's the guide at the bottom there. My guess is the tensioner was put on too tight or just failed early (40k mi). I'll know soon enough.

0 2016/06/29 14:15:08 gsp4life

Cheap exhaust gaskets don't hold up well

Cheap exhaust gaskets don't hold up well

0 2016/06/29 14:03:13 gsp4life

Here's where I got to so far. Removing more than I need to so it's easier to clean everything. I really want to remove the ugly black spray paint some moron put in there when it got stolen.

Here's where I got to so far. Removing more than I need to so it's easier to clean everything. I really want to remove the ugly black spray paint some moron put in there when it got stolen.

0 2016/06/29 13:57:29 gsp4life

You can see a piece of guide down there and some light gouging.

You can see a piece of guide down there and some light gouging.

0 2016/06/29 13:55:11 gsp4life

Kinda hard to see, but aside from being bent, it's not pressed on straight anymore. There's a raised ridge on the right side that's not on the left.

Kinda hard to see, but aside from being bent, it's not pressed on straight anymore. There's a raised ridge on the right side that's not on the left.

0 2016/06/28 08:19:29 gsp4life

0 2016/06/28 08:14:21 gsp4life

0 2016/06/16 15:15:01 gsp4life

Cam mark after 12 o'clock

Cam mark after 12 o'clock

0 2016/06/12 17:18:40 gsp4life

Zero degrees at crank pulley

Zero degrees at crank pulley

0 2016/06/12 17:17:45 gsp4life

So does drivers side

So does drivers side

0 2016/06/12 17:16:53 gsp4life

Pass side guide looks good

Pass side guide looks good

0 2016/06/12 17:16:37 gsp4life

0 2016/04/19 07:38:10 gsp4life

Page
4 of 4

Go To
Page

Go to page of 4 pages

1
2
3
4