YotaTech Forums
Jaguar xj6 alternator on left OEM Toyota (denso) on the right
Jaguar xj6 alternator on left OEM Toyota (denso) on the right
0 2016/05/23 14:13:19
0 2016/05/17 09:19:42
0 2016/05/10 13:37:10
0 2016/04/25 11:02:24
0 2016/04/25 11:02:21
0 2016/04/25 11:02:16
0 2016/04/25 11:02:12
0 2016/04/25 11:02:07
0 2016/04/25 11:02:00
0 2016/04/21 10:08:12
0 2016/04/21 10:08:03
0 2016/04/21 10:07:57
rear pillar pods....same way I did the front. MDF ring, bondo hair (sanded and smoothed out with grinder) and then bondo to fill in the pits and sanded with a palm sander with 150 grit disc. then covered in fabric.
rear pillar pods....same way I did the front. MDF ring, bondo hair (sanded and smoothed out with grinder) and then bondo to fill in the pits and sanded with a palm sander with 150 grit disc. then covered in fabric.
0 2016/04/18 11:10:36
also the handle will need to be plasti-dipped or painted as they don't make this in black, or not that I have found anyway
also the handle will need to be plasti-dipped or painted as they don't make this in black, or not that I have found anyway
0 2016/04/18 11:10:26
rear cardboard template for the tailgate (already soundproofed) not 100% sure whether I want to cover the top plastic portion in neoprene, or if I should shoot it with bedliner (UPOL Raptor) as it's an odd shape that may be difficult to cover and in a spot that it'll take some abuse
rear cardboard template for the tailgate (already soundproofed) not 100% sure whether I want to cover the top plastic portion in neoprene, or if I should shoot it with bedliner (UPOL Raptor) as it's an odd shape that may be difficult to cover and in a spot that it'll take some abuse
0 2016/04/18 11:10:20
and Option 5, Cast Stainless Steel and rubber
and Option 5, Cast Stainless Steel and rubber
0 2016/04/12 18:15:04
Let's Call this option #4 - billet aluminum and adjustable
Let's Call this option #4 - billet aluminum and adjustable
0 2016/04/12 18:15:03
0 2016/04/12 12:42:19
top down view of the 10" extension
top down view of the 10" extension
0 2016/04/06 09:21:02
width need to be adjusted, and it's missing the bull bar / stinger, but wanted to get a visual shape idea to know what I needed to change
width need to be adjusted, and it's missing the bull bar / stinger, but wanted to get a visual shape idea to know what I needed to change
0 2016/04/06 09:20:50
bumper approach angle actually matches up with current valence.
bumper approach angle actually matches up with current valence.
0 2016/04/06 09:20:39
moved over to the 89
moved over to the 89
0 2016/04/06 09:20:23
Side view
Side view
0 2016/04/06 09:20:07
cutout is for the Warn 8274 to stick up through the bumper. Hopefully I won't have to cut the grille, or at least that's the current plan
cutout is for the Warn 8274 to stick up through the bumper. Hopefully I won't have to cut the grille, or at least that's the current plan
0 2016/04/06 09:19:57
duct taped together most of the pieces and put on the 86 to mock up
duct taped together most of the pieces and put on the 86 to mock up
0 2016/04/06 09:19:48
all parts cut out (tried to keep them in left / right hand piles
all parts cut out (tried to keep them in left / right hand piles
0 2016/04/06 09:19:39
template glued on
template glued on
0 2016/04/06 09:19:28
0 2016/04/04 19:05:23
0 2016/04/04 19:05:16
then did a quick coat of bondo to feather the edges out and make the transitions smooth, filling all of the smaller pits and pockets left from the first go around
then did a quick coat of bondo to feather the edges out and make the transitions smooth, filling all of the smaller pits and pockets left from the first go around
0 2016/04/04 19:00:15
0 2016/04/04 19:00:03
0 2016/04/04 18:59:56
after a smoke break, it was set up and hardened, so I used my favorite tool in the world, a 5" angle grinder and flap wheel to quickly sand down and smooth out the filler
after a smoke break, it was set up and hardened, so I used my favorite tool in the world, a 5" angle grinder and flap wheel to quickly sand down and smooth out the filler
0 2016/04/04 18:59:48
sets up in less than 5 minutes so work fast
sets up in less than 5 minutes so work fast
0 2016/04/04 18:59:41
held the ring at the angle I wanted and used gloves to "sculpt the Bondo hair into place
held the ring at the angle I wanted and used gloves to "sculpt the Bondo hair into place
0 2016/04/04 18:59:34
0 2016/04/04 18:51:48
0 2016/04/04 18:43:53
Driver's side (with original map pocket moved back and covered in fabric)
Driver's side (with original map pocket moved back and covered in fabric)
0 2016/04/04 18:40:23
0 2016/04/04 18:40:15
0 2016/04/04 18:40:07