YotaTech Forums
She’s a no adjust.
She’s a no adjust.
0 2023/10/29 19:13:31
By some miracle the axle seals and brake cylinder are not leaking.
By some miracle the axle seals and brake cylinder are not leaking.
0 2023/10/29 19:13:37
Look at that backing plate!
Look at that backing plate!
0 2023/10/29 19:13:43
Try this at home.
Try this at home.
0 2023/10/29 19:27:27
0 2023/10/29 19:27:34
0 2023/10/29 19:27:40
0 2023/10/29 19:27:46
Looks better.
Looks better.
0 2023/10/29 19:27:51
0 2023/10/29 19:27:58
“My baby’s on the level…”
“My baby’s on the level…”
0 2023/10/29 19:28:07
0 2023/10/29 19:28:14
0 2023/10/29 19:28:20
0 2023/11/19 16:19:20
End of this trail.
End of this trail.
0 2023/11/19 16:19:31
That looked too deep, with big rocks and no recovery gear, we had to turn back. Next time we’ll come from the other side.
That looked too deep, with big rocks and no recovery gear, we had to turn back. Next time we’ll come from the other side.
0 2023/11/19 16:19:40
Some deep water, but solid below.
Some deep water, but solid below.
0 2023/11/19 16:19:51
0 2023/12/03 11:50:12
0 2023/12/03 19:24:43
0 2023/12/03 19:24:46
0 2023/12/03 19:24:48
0 2023/12/10 07:02:41
0 2023/12/10 07:02:45
0 2023/12/10 07:02:48
0 2023/12/10 07:06:58
0 2023/12/10 07:07:02
0 2023/12/10 07:07:05
0 2023/12/10 07:10:21
0 2023/12/10 07:10:24
0 2023/12/10 07:29:12
0 2023/12/10 07:29:17
0 2023/12/10 18:22:54
0 2023/12/10 18:23:01
0 2023/12/10 18:23:08
Antes.
Antes.
0 2023/12/17 17:54:47
0 2023/12/17 17:54:52
Feeler gauges and a heat gun work well to remove the originals.
Feeler gauges and a heat gun work well to remove the originals.
0 2023/12/17 17:54:57
Template provided
Template provided
0 2023/12/17 18:01:38
Decent hardware, but if you don’t get the alignment perfect, the studs wind up too short
Decent hardware, but if you don’t get the alignment perfect, the studs wind up too short
0 2023/12/17 18:01:45
This bracket is supposed to rivet to the A-pillar.
This bracket is supposed to rivet to the A-pillar.
0 2023/12/17 18:01:51
I didn’t have a whole saw large enough. Dremel cutoff wheel for the win.
I didn’t have a whole saw large enough. Dremel cutoff wheel for the win.
0 2023/12/17 18:01:56